Eight workstreams, two migrations, and a pass by an independent reader that
found four things this release was claiming about itself that were not true.
Two of the fixes change what people receive. Medication reminders went out
every fifteen minutes because the dedup key could not tell one dose slot from
another, and "handled by the app" was silencing every channel rather than the
one it names. Both are called out in the notes, because a user who set that
flag as a general mute will notice.
Two came from reports: an OpenAI-compatible gateway that the provider list
had no room for, after an earlier answer from us said otherwise, and four
places where a timestamp followed the browser instead of the profile.
The backup half is the one worth reading. Three record types were carried and
could not be restored, or could not be carried at all, and each failed in a
different direction: one dropped silently, one stopped the restore outright,
one was discarded while the restore reported success. What a backup holds is
now declared in one file with a written reason for everything left out, and
the roughly thirty types that are still carried by neither end are named there
instead of waiting to be discovered by someone who needed them.
The Del chip added beside the document card measured 4.06:1 against the card's
background, under the 4.5:1 floor, and axe failed the vault on it. So the
change that made the destructive key visible introduced a barrier of its own.
It uses the full foreground token now. The design rule says muted for meta
text, and a key hint is meta — but it is the one kind of meta that has to be
readable at a glance, so here the contrast rule wins and the reason sits next
to the class list rather than in a commit nobody will read again.
Found by running the e2e suite locally before pushing rather than after.
The guard tested whether the argument list contained the substring "timeZone".
`timeZoneName: "short"` contains it. That option appends "GMT+1" to the output
and leaves the zone as the browser's, so a formatter written that way sailed
through while being exactly as wrong as a bare one — and looking more careful
than a bare one, which is worse.
Tightening it to a colon-terminated property then reported nine correct call
sites, because the shorthand `{ timeZone }` is what most of this tree writes.
The honest response to that would have been to allowlist all nine, which is
how a guard stops guarding. It accepts both forms now, and a test pins both
directions rather than leaving the regex to be trusted.
Two exclusion reasons in the backup plan aged inside their own release and are
corrected: push attempts now also hold the reminder dedup anchors this release
introduced, and the thumbnail's "rebuilds from the stored bytes" only holds on
the disaster-recovery path, since a portable export carries no bytes to rebuild
from.
Four things an independent read found, three of them things this release said
about itself that were not true.
A custom mood tag travelled without its label, its icon, its sort order and
its SCALE. The label is the smaller loss: the person who named a factor
"Migräne" would have got a key back. The scale is the real one — the inverse
flag marks a factor where a high value is bad, and dropping it does not lose a
label, it silently reverses the meaning of every rating already recorded
against that tag. Custom cycle symptoms lost their label the same way. Both
now carry the ciphertext verbatim, like every other encrypted column in a
disaster-recovery payload.
The plan file claimed, in the present tense, that a guard requires both a
payload reader and a restore branch for every carried model. No such guard
exists. The commit that introduced the file said so honestly; the file itself
said the opposite, and roughly 31 models have neither end. BACKED_UP means
"must be", not "is", and both the plan and its test now say that plainly. The
wrong sentence is recorded rather than quietly swapped, because it is the same
defect the file was written to prevent.
The export route still told operators that labs, allergies, illness episodes
and workouts could be exported but never restored. The restore route
re-creates all of them, and since this release nutrient day totals too. The
scope now points at the plan instead of repeating it beside the code, which is
how that sentence came to be wrong.
And the export card promised "every record you own". It does not, so it no
longer says so — six locales.
The resolver is online-first, so mounting the databases fills the ASN
and carrier but does not by itself keep login IPs on the host. Point at
the IP_GEO_LOOKUP_DISABLED section that does.
The hint said switching a widget off here turns it off in the mobile
app. This page writes the flag; whether the client applies it on its
next read is the client's business, and there is an open report that it
does not. Say where the setting lives instead of promising a result
this surface does not control. Six locales.
BMI renders on the native dashboard and was configurable from nowhere.
Two individually-correct decisions produced it: `bmi` is a catalogue id
with no web render path, and the web layout editor filters those out
because a toggle over something this page cannot draw would be a silent
no-op. The widgets PUT accepts and persists them all the same, and the
native client writes them, so an account ended up holding rows it never
set and could not change from any surface.
The sortable list stays exactly as it was. Below it, the ids the web
does not draw but the layout carries get their own labelled group with
the same two flags and no reordering — placement belongs to the client
that draws them. An account with no native client has nothing there and
sees nothing. The module gate applies as it does above, fail-open.
Refs #581
A focused card deleted on Backspace as well as Delete. The timeline's
roving tabindex gives a card focus the moment someone tabs into the
grid, Backspace is the reflex "go back" key, and a card carries no
delete control at all — so the reflex press removed a medical document
with nothing but a transient undo toast behind it.
Delete alone now deletes. The key resolution moves into a pure helper
in vault-utils so the contract is testable without a render harness,
and the card stops keeping that contract in a code comment: the overlay
button carries aria-keyshortcuts, and a kbd chip appears while the card
holds focus. The label is per-locale (Entf / Suppr / Supr / Canc).
The switch was described three times as applying to what you upload
next. A genuine off-to-on flip also enqueues a pass over the documents
already stored without a summary, capped at 200 per flip — scanned
medical documents going to a third-party provider, from copy that reads
as forward-looking only.
Drop "newly uploaded" from the sub-label and give the disclosure the
sentence it was missing, including the cap. Six locales. The behaviour
is right and stays as it is; only the sentence changes.
A guard pins the number in the copy to MAX_ENQUEUES_PER_RUN, so moving
the cap without touching the copy fails.
The runtime has always read GEOLITE2_DIR, but the variable was absent
from the compose `environment:` whitelist, from both env examples, and
from the docs. A variable that is not on that whitelist never reaches
the container even when the operator's `.env` sets it, so the override
existed in code and was unreachable from the documented path.
Put it on the whitelist, document it in both examples and the manifest,
and add `docs/self-hosting/geolite2.md`: fetch the databases with a free
MaxMind account, mount the directory read-only, point the variable at
it. The compose file carries the bind-mount line commented out beside
the app service.
The admin notification told the reader to set MAXMIND_LICENSE_KEY in
this repository's Actions secrets — something nobody running the
published image can do, about a fallback that sends their sign-in
addresses to a third party. It now names the mount, names the online
provider it is actually querying, and links the runbook. Six locales.
It also no longer claims the carrier column stays empty; the online
tier has filled the carrier from the ISP field since v1.25.8.
A blank GEOLITE2_DIR now resolves to the default instead of the process
working directory: compose substitutes an unset variable to the empty
string, which is not nullish.
Refs #659
The Bestand tab was 1,139 lines of one client file holding two concerns that
only meet at the row shape: the list of containers a person holds, and the
three dialogs that change it. Registration, per-item correction, packaging
economics, the summary and the row rendering all shared a scope, so reading
any one of them meant scrolling past the rest.
Move-only. The dialogs go to `inventory-dialogs.tsx` with the day-input
conversions their fields produce; the row shape and the cache-invalidation
they both need go to `inventory-shared.ts`; the section keeps the summary and
the list at 458 lines. Every export the tab offered is still offered here, so
no caller changes. No copy changes, no new keys.
Two suites pin these contracts by reading the file's own source — the register
dialog's unit conversion and the correction dialog's sparse patch. Their
`readFileSync` now names the file the code moved to. The assertions are
unchanged, byte for byte; only the path they read is.
The retention-purge comments still cite migration 0277 for indexes that landed
in 0276 — the renumbering moved the directories and left the prose behind. The
schema is trustworthy because its comments are, so a wrong number is not
cosmetic.
The import worker's `already_recorded` reason claimed the skip covers a dose
recorded on any other intake surface. It does not: `source` is part of the
live-row unique, so a hand-logged dose and an imported one at the same slot are
different keys and both are written. Say what the mechanism actually does, and
say plainly that cross-surface dedup is not there.
The per-medication import and the account-wide dose-history import queued
their work through ninety near-identical lines each: row lock, stale-job
sweep, active-job refusal, job row, pg-boss send, and the fallback that fails
the row when the queue is not there. Five steps written twice drift, and the
drift shows up as an import that hangs on one surface and not the other. The
status projection moved out of these routes for the same reason; this is the
write half.
Scope is the only real difference, and it is one argument. What the two
surfaces legitimately say differently — the 409 wording, the envelope, the
kickoff audit line — stays at the call site.
The replay key had the same shape of problem in smaller form: the export
reader owned a function for it and the hand-listed body inlined the same
template. Both now call one function, with a test that pins them equal for
the same medication and instant.
The supply tab carried its own copy of the two container kinds whose first
opening starts a degradation clock, with a comment saying it mirrored the
state machine's list. Nothing enforced the mirror — the state machine types
itself against the generated Prisma client, which the browser bundle cannot
carry, so a copy was the only way to say it.
Move the list into a client-safe module with no imports and let both sides
read it. The state machine re-exports it under the Prisma enum, so a renamed
or dropped container kind is now a compile error rather than a member that
quietly stops matching.
The resolver reads the profile's sex for the body-fat and pulse bands, and
nothing asserted it. A resolver that stopped reading the field, or read it and
defaulted to one side, passed the whole suite. Pin both recorded sides and the
neutral band that OTHER and an unanswered profile share.
`binaryReferenceSex` was already the declared owner of the shrink from the
three stored values to the two a sex-split reference table has rows for, but
eight sites still narrowed inline — including a byte-for-byte private copy in
the effective-range resolver and a ternary 37 lines above a `toProfileSex`
call in the same file. Each of those is a place the fallback can drift.
Delete the copy, replace the ternaries, and name the pair once as
`BinaryReferenceSex` so a signature that needs it stops re-listing the two
literals. No behaviour changes: every site already resolved OTHER and "no
answer" to the same neutral or absent value, and the existing suites pass
untouched.
A migration container starts empty, so applying 0281 there proves the
statements parse and nothing else — the backfill's WHERE matches no rows and a
broken expression passes green. Every self-hoster runs it against rows that do
carry a leg, and those are the only rows it exists for.
Seed the pre-migration shape, run the migration's own UPDATE read out of the
committed file, and assert an attributed row comes out still knowing which leg
broke, an unattributed one is left alone, and a second run does not nest the
array.
The batch route has accepted a `syncTrigger` since v1.32.8 and put it on the
wide event, where no human reads it. Half of what was promised got built: the
value is written and appears in three places in the codebase, none of which is
a screen anyone looks at.
Persist it on the account, alongside the instant of the most recent batch that
arrived without the app being opened, and publish both from
`GET /api/integrations/healthkit`. The card now names how the last sync arrived
and when data last came in on its own. `healthKitLastSyncedAt` alone reads
identically whether the phone delivers by itself or only while someone has the
app open, which is why "is background delivery working" could not be settled
from either side.
A batch that declares no trigger writes null rather than leaving the previous
one standing — the field describes this sync, and an older client's silence is
not evidence about it. A foreground batch leaves the background timestamp
alone; overwriting it would erase the only answer the card has.
Also here: WHOOP, Fitbit and Google Health join the workout-freshness table.
All three write workouts, and without an entry their cards could report every
measurement type fresh while the workout leg had been silent for weeks. And the
status pill drops a generic `aria-label` that replaced its own accessible name,
so a screen reader announced the same words for a healthy connection as for a
broken one.
`failing_leg` was one slot, so two legs of the same provider failing in
overlapping windows overwrote each other. The row remembered whichever failed
last, and that leg recovering then cleared an error the other one was still
causing — the ledger forgot a live failure and painted the card green over it.
The slot becomes a set. A failure adds its leg, a success removes its own, and
the error state, the per-kind buckets and the streak anchor clear only once the
set is empty. The array is ordered oldest failure first, so the last element is
the leg that wrote the message `last_error` holds; when that leg recovers while
others are still failing, the message is cleared rather than left describing a
leg that is now healthy.
An unattributed failure adds nothing and removes nothing. A single-leg provider
therefore behaves exactly as before, and a multi-leg provider no longer loses
what its other legs already reported.
The column never reached a client — it is absent from the status serialiser and
from the OpenAPI contract — so it is replaced rather than shimmed.
The module-gate branch cited the client-managed skip as its precedent for
advancing past a cycle. That skip no longer exists in this file, and the
reason the gate advances is its own: a disabled module has nothing left
to deliver.
`apns-collapse-id` is a replace directive: a push carrying an id
supersedes the earlier undelivered push with the same id. Every
medication reminder carried the literal string MEDICATION_REMINDER, so
three medications due at 08:00 arrived on the phone as one notification
naming one of them. The user takes that one and misses the others with
nothing on screen to suggest anything was dropped.
Key the collapse on the per-slot tag the Web Push sender already
coalesces on, falling back to the event type when a payload carries none.
Grouping stays on `threadId`, which is what grouping is for. Discreet
mode keeps the generic id — no record-identifying string on the lock
screen — and a tag over Apple's 64-byte ceiling falls back rather than
costing the send.
The per-phase "already sent today" guard read the Telegram message
ledger, and that table is written only when a Telegram send succeeds. A
user on email, APNs or ntfy never had a row, so the 15-minute tick
re-derived the same overdue slot and sent it again on every pass — around
fifty mails for a single missed dose.
Anchor the guard in `push_attempts` instead, the ledger the daily
briefing and the illness escalation already use. Two properties are
deliberate: the anchor is stamped for every dispatched slot regardless of
what any channel returned, because keying it on a delivered push would
re-open the flood the moment a channel starts failing; and it is stamped
before the dispatch, so a crash costs one phase's notice rather than a
repeat every quarter hour.
The key carries the schedule id and the slot's real HH:mm alongside the
phase and the local date. Both are load-bearing: two legacy
single-window schedules on one medication share the empty first-class
time-of-day, so a coarser key would collapse the evening dose into the
morning one. The tests assert the other direction too — the next phase
still escalates, and the next local day starts clean.
The Telegram ledger keeps its message-tracking duties; it is no longer
the dedup key. Anchor rows carry a sentinel channel and stay out of the
operator's notification health and diagnostic reads, which count
deliveries, not decisions.
`medication.clientManaged` and `measurementReminder.clientManaged` mean
the iOS client schedules the reminder locally, so the server should not
push it. That is what the OpenAPI description, the settings copy and the
iOS contract all say. What the crons did was skip the dispatch entirely,
so a user who flipped the switch also lost Telegram, ntfy, webhook,
email and Web Push — channels they may well read on a desktop while the
phone holding the local schedule sits in a drawer.
Move the gate into the dispatcher's channel loop, where it applies to
APNs and nothing else. The skip is not counted as an attempt, so
`dispatched` keeps meaning "something reached the user", and it stays
countable: the same wide-event keys the crons emitted are emitted here,
plus a `skipped` row in the push-attempt ledger.
The Vorsorge path is the sharper half. It suppressed every channel and
then advanced `nextDueAt`, which dropped the reminder out of the
preventive-care card and out of the daily digest: a reminder that never
reached anyone was recorded as handled. The advance now happens only
where it always belonged, after a dispatch that a channel actually
delivered. When nothing delivers, the reminder stays overdue and visible.
The restore resolves a mood entry's rated factors by key and asks only for the
seeded catalogue. A tag the user created is not in it, so the lookup came up
short and the whole restore threw 'Unknown mood factor keys'. The file was
complete; it simply could not be read back.
That is the same cause as the cycle symptoms two commits ago, with the
opposite ending. There, an unresolvable key was filtered out and the loss was
silent. Here it stopped everything. One shape of missing definition, two
answers, neither of them the right one.
The account's own tag definitions travel now, get written before the factors
resolve, and the lookup accepts the seeded catalogue or the owner's own. The
seeded rows stay out of the file for the same reason as before: a restore must
not rewrite another instance's reference data.
Four more test mocks needed the new delegate, which is again the compiler and
the suite naming the call sites rather than me hunting for them.
The export has written nutrient day totals since v1.29. The canonical schema
never declared the field, so `.passthrough()` carried it through parsing and
no reader ever looked at it: every water and vitamin total in the file was
discarded on restore, and the restore reported success.
Declared in the contract, cleared and re-created beside its siblings, and
counted in both places that count — what the file holds and what the restore
replaced. A count that stops at the domains someone remembered is how this
stayed quiet.
restoreCycleData was loud about one missing reference and silent about
another, three lines apart. An unknown cycle reference threw; an unknown
symptom key was filtered out of the list, so the day-log came back with one of
its symptoms quietly gone and the restore reported success.
The cause was upstream: the seeded catalogue is reference data every instance
has, but a symptom the user created lives only in their account and was never
carried. The key had nothing to resolve against, and the filter turned that
into silence.
Both ends now. The account's own definitions travel with the backup, the
seeded rows deliberately do not — shipping those would let one instance's
restore rewrite another's reference data. And the resolve step throws on an
unresolvable key rather than filtering it, so the same function answers the
same question the same way twice.
Widening the builder's client type made four export tests fail on a missing
delegate, which is the sweep working: those are the call sites, named by the
compiler instead of found by reading.
The mirror of the wipe plan, for the same reason and against a worse failure:
a list that was right when written and stops being right every time a model is
added. On the delete side that leaves data behind; here it means data does not
come back, and nothing says so until someone is restoring a backup because
something already went wrong.
The list is longer than the wipe list by sixteen models, and that gap is the
point. A wipe may lean on the database — deleting a medication cascades to its
schedules, dose changes and inventory events — but a restore has no cascade,
so every child has to be named here.
Every exclusion carries its reason in prose, and the guard enforces a length
floor on it. That floor is not pedantry: the first draft of this file said
'Same as WithingsConnection' four times, which is a pointer rather than a
reason, and a pointer silently inherits whatever the thing it points at
becomes. Writing the decision where it is made is the only way it stays
reviewable.
The guard found two things in its own author's work on the first run: a model
with no verdict at all, and a reason too thin to be one.
The restore side of the guard — that every carried model also has a restore
branch — lands with the payload work it will police.
A formatter with no timeZone follows the browser, which is a different
question from the one this app answers. Four surfaces had drifted apart that
way before anyone noticed, and one of them printed a shared report a day off
from the page it came from.
The admin host chart went with them rather than onto the allowlist. Server
samples are real instants, and an operator reading their own instance should
not find a spike at 14:20 here and 15:20 two screens away.
Two deliberate limits, both written into the test. It does not match
toLocaleString, which in this tree is overwhelmingly a number formatter, and
burying four real hits under every thousands separator is how a guard gets
silenced. And it cannot tell a Date built from calendar arithmetic — a month
label, a weekday header, no instant behind it — from one parsed out of stored
data, so those four sites carry a written reason instead. The value is the
ratchet: a new bare formatter has to be argued for before it ships.
The bucketer hard-coded Europe/Berlin for day, week and month boundaries, so
a reading taken on the last evening of a month landed in the wrong month's
bar for everyone who does not live there. Two smaller siblings did the same
thing: the Today chip asked the browser for a time instead of the profile,
and the score card's tooltip formatter carried a locale but no timezone.
The boundary timezone is a required option rather than a defaulted one. A
default would have left any caller that forgets to pass one still wrong and
still silent; required makes the compiler name them, which is how the three
call sites and the eight test sites in this diff were found rather than
guessed at. The tests were always asserting Berlin's calendar without saying
so, and now they say so.
Two fixture mistakes worth recording, both caught by running the tests rather
than trusting them: summer time is already in force in Berlin on 31 March, so
the first instant chosen was April on both sides; and 31 March 2025 falls in
the same ISO week as 1 April, so the week case needed its own instant where
one side is still Sunday.
The page at c/[token] resolved the owner's timezone; the PDF download beside
it resolved nothing and fell through to the display default. Same link, same
reading, two dates — and the one a practice files is the one that was wrong.
Resolved in the shared download gate rather than in the route, so the PDF and
the FHIR bundle cannot drift apart the way the page and the PDF did. The
owner's clock preference travels with it for the same reason.
The fixture is deliberately west of UTC: Berlin is the fallback, so a Berlin
fixture cannot tell a resolved timezone from a forgotten one.
The rotation-coverage guard greps the script for a quoted column name.
Listing the new column in the header comment satisfied that grep without
the script rotating anything, which made the guard pass on a script that
would have left the column behind. The comment now names it unquoted and
says why.
Names LiteLLM, OpenRouter and vLLM, states what it does not share with
the OpenAI provider and why, and keeps the Local provider's own section
intact — it still speaks the same wire and remains the right pick for a
model on your own machine.
The properties this provider has to keep: it resolves against the base
URL that was saved for it, the pinned OpenAI arm cannot see that URL and
still posts to api.openai.com, and the OpenAI key never travels to the
gateway. Each is asserted at the wire, not on internals.
The SSRF floor is checked through the same alt-notation classes the
Local provider is checked against, and the pinned tags are shown to keep
requiring a public host even when the operator opened every private one.
The AI settings connect-src is pinned to what it already allowed: the
gateway is called server-side, so no CSP change is needed, and a future
change that needs one will turn this red.
Its own form with its own three fields, its own entry in the provider
dropdown and in the fallback-chain editor, and copy in six locales that
says plainly where the OpenAI key does not go.
The chain editor offers the entry but the default chain does not carry
it: it resolves only against a base URL somebody saved.
The read endpoint reports the gateway's base URL and model, and the
bearer as presence only. OpenAPI regenerated.
The chain gains a seventh entry. It builds the OpenAI client against the
base URL the user saved, with the bearer they saved for it and the model
they named, and it reads none of the OpenAI columns — the pinned
api.openai.com arm stays pinned.
Host policy is the Local provider's, unchanged: a public host always, a
private one only where the operator allowlisted it, which is what a LAN
LiteLLM or vLLM needs. Egress keeps riding safeFetch.
The JSON-mode dialect the Local client learns per endpoint moves into a
shared module and now serves both clients, so a gateway that rejects
response_format is detected once and retried without it.
The entry stays out of the default chain: it can only resolve against a
base URL somebody configured.
Three dedicated User columns — base URL, optional bearer, model — for a
provider whose endpoint the user chooses. They are separate from the
OpenAI columns on purpose: the OpenAI arm pins api.openai.com, so it must
share no column with a user-supplied host, and a gateway must never
receive the key issued for OpenAI.
The bearer joins the encrypted-column registry and the rotation script;
the three columns join the account-wipe reset set.
Four specs navigated and then read the DOM once, with nothing in between
that waits for anything but the network. An idle network says nothing about
whether React has rendered, so the read can sample a tree that is still
mounting and the assertion then blames the application for a race inside the
test. Two such reads went red on consecutive CI runs, on different specs.
The settings over-scroll guard also slept a fixed 500 ms, which is the wrong
shape twice over: too long when the page is ready, too short on a loaded
runner, and it never says what it is waiting for.
The structural guard runs in the unit suite rather than in Playwright,
because e2e runs at PR-CI only and flaky counts as failed there — one
unguarded read otherwise costs a whole pipeline before anyone sees it. It
refuses to count a wait whose rejection is thrown away, since that reads
like a guarantee and is not one, and would leave the check defeatable by
appending a catch. The one deliberate swallow is on the allowlist with its
reason: a genuine regression there still fails at the width assertion below
it, which reports the measured number instead of a timeout message.
A release asset is served with content-disposition attachment and nosniff, so
an image embedded from that URL renders as a broken image in the notes. The
raw path serves it as an image, which is the only thing that actually works.
A chart shows the shape and hides the numbers. An appointment needs the
numbers, and so does anyone moving readings into a spreadsheet.
The table reads the same expression the chart hands Recharts, after the range
slice, the week/month bucketing and the display scale, and it formats through
the chart's own value and date formatters. Nothing is re-derived, so a cell and
the tooltip cannot print two numbers for one point.
Collapsed by default, with the point count in the trigger so the size reads
while it is closed; the region scrolls in its own box rather than growing the
page, and the table primitive already scrolls a wide row set sideways. The
caption names the grain, because a weekly mean labelled as a daily reading
would be a lie, and the grain now has one source shared with the bucketing.
Derived overlays get no column: a moving average is drawn from the points, not
measured. An empty window renders no table at all, since the chart's own empty
state already says there is nothing there.
Opt-in per mount. The metric sub-pages take it; the dashboard tiles do not,
because a table under every tile buries the dashboard it summarises.
Refs #636
The tag crosstab already ran a with-versus-without Welch test per structured
tag, with a D to D+1 pairing mode whose stated example was an evening tag
against next-day recovery. It only ever had one channel at that lag, and a
recovery score is a wearable composite plenty of accounts never record. The
rated-factor board next to it has tested next-day resting heart rate and HRV
since v1.14.0, but a rated factor is a continuous score, so a binary tag never
reached either vital.
Add both to the tag map. Same engine, same per-side day floors, same
Benjamini-Hochberg family, same card. The fetch filter derives from the map, so
the channels come along without a second query.
The delta read-out goes neutral to match the rated-factor board: with resting
heart rate on the board, a positive delta is worse on one row and better on the
next, and a green plus sign would claim a verdict the association cannot carry.
Refs #616
The preamble already says once what the two states mean and that neither is
absence; repeating it per row would have doubled a manifest that rides every
turn.
The unit suite mocks Prisma, so it proves the discriminant and nothing about the
query underneath it — a wrong column would have left every test green and every
account answering no_data_unconfirmed in production. Seeds the reported case and
the four other shapes: an empty record, another account's rows, tombstoned rows,
and a history that mixes units.
Rounds the out-of-window mean to one decimal, like every other mean the snapshot
surfaces, and annotates a failed manifest probe rather than letting it degrade in
silence.
The mutation check found both holes: an addendum test that only looked for the
new reason codes passed with the old declare-absence-and-move-on sentence still
in place, and a block-failure check whose window was wide enough to see the
neighbouring block's annotation.
The fixture is the report: a fortnight of glucose readings from April 2024 on an
account that displays them everywhere else. The clock is pinned so it cannot age
out of the window it was written to sit outside of.
Covers the four states an empty window read can resolve to, that a never-recorded
metric and a historical one differ in the SAME run, that a mean is withheld
across mixed units rather than fabricated, that the manifest advertises the range
instead of "absent", that both instructions branch on the reason code, and that a
miss carrying figures reaches the prose verifier's authoritative set. Adds the
medication-compliance page to the failed-read sweep and pins the narration
blocks' failure annotation.
A Coach retrieval tool that read the window and found nothing returned
`reason: "no_data"` — the same code for two situations that have nothing in
common: the record holds nothing for that metric, and the record holds a
substantial history for it, all of it older than the window that was searched.
Nothing downstream could tell them apart, so the Coach said the honest-sounding
sentence for the wrong case, and then, having been told there was nothing there,
changed the subject. Someone with a year of imported glucose readings was told
the readings did not exist, on the same account whose glucose page was showing
them.
The window cap stays. It exists because a multi-year history does not fit a
prompt budget, and widening it would only move the same failure. What was
missing is the ability to say a different true sentence.
- `tools/availability.ts` — one grouped aggregate per miss, no rows
materialised, resolving four states: `no_data` (probe confirmed empty),
`outside_window` (rows exist, older than the searched window; carries the
count, the date range in the user's own timezone, and a bounded per-series
mean/min/max), `unavailable_in_scope` (rows exist inside the window and the
domain still produced none — a module is off), and `no_data_unconfirmed` (the
probe itself failed; absence was never established, so it is not asserted).
- Every empty read in the executor routes through it. A bare `no_data` can no
longer be returned without the record having been checked.
- The DATA INVENTORY carries the same distinction, so a domain the window
cannot reach is advertised with what it holds instead of as absent — the model
no longer skips the fetch, and a vague follow-up keeps the subject.
- Both instructions that told the model to report absence and move on now
branch on the reason code, and forbid answering about one metric by reporting
another.
- The out-of-window aggregate joins the authoritative set for the prose
verifier, so the sentence the fix exists to make sayable is not elided.
- A cross-cutting narration block that throws is now counted rather than
vanishing into a `null` that looks like honest absence.
- The medication-compliance page tells a failed read apart from an account with
no medications, instead of inviting someone to re-enter what it already holds.
Refs #648
`Partial<typeof item>` inferred the literal types off the base fixture, so an
override could not swap the container kind or null a date. The fixture takes
an explicit row shape instead.
Hardcoding the container kind in the batch-import consumption path or in the
refund path left the whole suite green — neither had a scenario that read a
clock-less container. Both now do: a back-dated import chunk against a tablet
pack stays IN_USE with no deadline, and a refund that brings units back to a
long-opened pack reads IN_USE rather than expired. The pen counterpart of the
import case is pinned alongside.
The fake client's `updateMany` learns the `id: { in: [...] }` form the batch
claim uses; it only understood a single id before.
The no-runway arm of the low-stock evaluation now has its written-off count
asserted too.
The comparison now includes `updated_at`, so a second application that
rewrites an already-correct row is visible even when the value it writes is
identical. Without it the assertion passed whether or not the guard that
skips untouched rows was there.
The first pass of migration 0276 restored the rows the in-use clock had
already flipped, but every clock-less container still IN_USE carried the same
clock-derived `expires_at`, most of them with the deadline still ahead. The
daily expire scan would have worked through them over the following weeks and
reproduced the whole defect one row at a time.
A clock-less container's `expires_at` is now set from its printed expiry —
usually nothing, which is how it stays out of that scan. Pens and ampoules
keep theirs; their clock is real.
Submitting the correction dialog is out of reach for the SSR component
tests, so the two behaviours that only show up on submit are pinned against
the module source: a date rides along only when it changed, and a cleared
field sends null rather than an empty string. The route side of the same
contract is covered by a real request test.
The row printed the opening date and the printed expiry with nothing between
them. It carries the same middle dot the unit figures use.
The docblock now says out loud what the enum cannot distinguish: AMPOULE
covers both a punctured multi-dose vial, where the post-opening window is
real, and a carton of single-use glass ampoules, where it is not. The kind is
never auto-selected, so picking it is a statement about an opened container,
and the opening date is editable when it turns out not to be.
The supply tab rendered a container's kind, its unit count and a state badge,
and nothing else. A row could read "Expired" with nothing on screen to say
which date caused it, and the correction dialog only ever offered the
remaining-unit count — so the opening date, which the intake consumption hook
writes without the user ever typing it, could not be taken back.
Each row now carries the two dates it has, and the correction dialog edits
both alongside the unit count. Each field rides along only when it actually
changed, so saving a stock correction never rewrites a date left untouched,
and clearing the opening date sends null, which the route reads as "this was
never opened" rather than "leave it alone". Beside the opening date the
helper text says whether the kind carries a 30-day window at all.
The headline stops contradicting itself. "0 of 0 doses remaining" next to
"+ 54 units expired" read as "nothing was ever recorded" beside "stock was
written off"; when the available pool is empty and only expired stock is
left, one line says so instead. The low-stock push follows: no usable supply
with written-off units on hand is a different errand from an empty pack, and
`expiredUnits` now reaches the payload, the notification metadata and the
wide event.
Migration 0276 reverses the rows that reached EXPIRED only through the
post-opening clock on a container that never had one. It moves a row back to
IN_USE when an opening date is recorded and ACTIVE when none is, and sets
`expires_at` from the printed expiry — which for these rows is usually
nothing at all, because they recorded none.
The predicate is exact rather than approximate: nothing but the printed
expiry and the in-use clock can write EXPIRED, so a clock-less container
whose printed expiry is absent or still ahead can only have got there through
the clock. Pens and ampoules keep their EXPIRED, so does anything whose
printed date genuinely lapsed, and so does a drained container. No date is
invented and no printed expiry is fabricated.
The integration test seeds the before-state, applies the migration SQL from
disk, and asserts both what moves and what stays — the testcontainer starts
empty, so the migration running at boot proves nothing on its own.
A supply container went EXPIRED 30 days after its first use no matter what
kind of container it was. That window exists because puncturing an injection
pen exposes its contents and the product information caps how long the rest
stays usable; a blister of tablets has no such limit, every tablet sits in
its own sealed cavity, and pressing the first one out says nothing about the
rest. The state machine never read `containerType`, so a tablet pack opened
five weeks ago had its remaining stock written off.
The clock now keys off the container kind. PEN and AMPOULE carry it: both are
a single sealed reservoir that the first dose breaches. BLISTER, INHALER,
BOTTLE and OTHER do not: their units stay individually sealed, or the
arrangement is simply unknown, and a fixed 30 days would be a number nobody
entered. The printed expiry still applies to every kind, so an unknown
container is not an unbounded one.
`computeExpiresAt` takes the kind too, so a clock-less container with no
printed date now persists no `expiresAt` at all and the daily expire scan
never sees it.
The per-item PATCH gains a way back out: `markAsFirstUseAt` accepts null and
clears the opening date, which is the correction a container needs after the
intake hook auto-opened it from a back-dated dose.
Also drops `daysRemainingInUse`. It had no caller anywhere in the tree and
its docblock described a chip that does not exist.
The wrap assertion gated on the section heading, but the signals card paints a
skeleton heading first and swaps it for the resolved one — so the element could
detach between the visibility check and the measurement, and the skeleton
heading carries no action slot to measure in the first place. Gate on the
caption itself and read both rects in a single evaluate.
The Insights overview panned sideways at every phone width. SectionHeading
pinned its trailing action slot with shrink-0, which sizes a flex item to its
max-content width. That slot was designed for a compact control, but every
caller passes prose today — the provenance method caption, the device-score
subtitle, the sleep-quality subtitle. A sentence at max-content measures
1229 px in English and 1464 px in German, and since the row sits inside the
AuthShell <main> — whose overflow-y:auto makes overflow-x compute to auto —
that width turned the page into a horizontal scroller. min-w-0 lifts the flex
min-width:auto floor so the caption wraps to the row instead; the parent's
flex-wrap still moves the slot to its own line before anything is squeezed.
The existing width guards could not see this. Both measured
documentElement.scrollWidth, which never budges when <main> absorbs the
overflow into its own scroll area, and the insights case ran against an empty
mocked payload that fits any viewport by construction.
- Add e2e/utils/horizontal-overflow.ts: asserts the document AND the <main>
scroll container, and names the widest offending element on failure.
- Add e2e/mobile-horizontal-overflow.spec.ts: sweeps /insights, /, /measurements
and /medications at 360/390/393/402/430 px against populated fixtures, plus a
canary proving the measurement can see through <main>, and a check that the
insights fixture really populates the page.
- Rewrite the cycle spec's empty payload as a populated one and sweep every
phone width; its /insights case moves to the new spec.
- Point mobile-density.spec.ts at the shared assertion — it carried the same
document-only blind spot.
Three legs, none of which stands alone.
`destructive-control-guard.test.ts` is the structural one. A registry
names every destructive control, what it takes, and how recoverable that
is; three detectors then make FORGETTING to register the failure mode.
The obvious guard — every trash icon must sit near a dialog — fails both
ways and fails quietly: it misses the control that destroyed the most
here, a PUT carrying two empty strings with no trash icon involved, and
it cries wolf on the trash icon that drops a row from an unsaved draft.
Both classes are live in this tree, and a guard suppressed on half its
hits teaches people to suppress it. So the judgement lives in the
registry, where it is written down and reviewable, and the mechanism only
guarantees that a new control cannot arrive unnoticed and a removed one
cannot leave a lie behind. What it cannot do is on the record in the
docblock: it cannot prove the registry complete, and it cannot prove an
entry true. Skipping a confirmation is possible, but it costs a written
argument, and the length floor is enforced.
`confirm-button.test.tsx` proves the dismissal contract once, where it
belongs: the trigger carries no click handler, the caller's callback
reaches exactly one node, the dialog action, and cancel never sees it.
An earlier draft also asserted that a closed dialog renders no confirm
control; that passed with `open` hard-coded true, because Radix portals
do not render server-side at all. It was measuring the renderer, so it
is gone rather than left green.
`about-me-clear-scope.test.tsx` covers the finding itself: the request
carries no allergies key at all, the clearing call reaches the control
only as `onConfirm`, and the allergy field stays editable so the targeted
way to clear it survives.
The existing settings suite grows to name every newly guarded control by
slot, plus the threshold override switch, whose off position performed
the same irreversible delete as the Reset button beside it.
Every assertion was mutation-checked.
Settings → AI "About me" had one Clear control wired to
`save.mutate({ aboutMe: "", allergies: "" })`. One tap, no dialog, and
the allergy line went with the note — while the toast it raised said
"About-me note cleared", which is what the control looks like it does.
The allergy line is the first thing a clinician reads and the column is
overwritten in place, so there is nothing to restore afterwards.
Scope the control rather than only gating it: it now writes `aboutMe`
alone and omits `allergies`, which the PUT leaves untouched by contract,
so the payload cannot carry the allergy line away even if the dialog is
ever dropped. Clearing allergies stays possible in the allergies field
itself, which is a deliberate act on the thing being emptied. The
confirmation on top guards the note.
The same one-tap shape ran through thirteen other controls that
overwrite a column or drop a credential with nothing to restore from.
They route through the shared confirmation now: both Codex disconnects
(personal and the instance-wide shared account), the AI server key, the
profile photo, the threshold reset — all, per metric, and the override
switch, whose off position performed the same irreversible delete from a
control that reads as a display toggle — the source-priority order, the
dashboard layout, the Insights overview, a single target range, a
remembered Coach fact, a past Coach plan, a logged cycle day and a custom
cycle symptom.
`ConfirmButton` moves to `components/ui`, since it is no longer a
settings-local helper, and gains `ConfirmDialog`: the same dialog without
a trigger, for destructive controls that are not buttons. A switch has to
stay on when the dialog its off position raised is cancelled, and a
control that could not reach for the primitive reached for nothing —
which is a fair part of why those were the ones that shipped unguarded.
Copy lands in all six locales.
The description promised that null or an empty string clears any field.
An empty string clears the free-text ones and now gender, but email is
validated as an address and 422s on it, and the display preferences are
not clearable at all. Name them rather than let a client find out.
Adds the cases that were missing everywhere except the FHIR conformance
suite: an empty string clears without taking its siblings down, OTHER
round-trips through the profile and onboarding writes, an unsupported
value is still refused and says which field it is about, the Strain
model scores an unanswered account on neither side, the dashboard bands
give OTHER the neutral fallback, the snapshot payload carries the value
instead of flattening it, and the doctor-report cover omits the row
rather than claiming a value the account never chose.
Refs #645
The profile validator has accepted MALE, FEMALE and OTHER for a long
time, but the published contract documented two, and a client written
against that contract had no way to know the third existed. The profile
PATCH is one write, so a rejected gender took every sibling field with
it - a time-format change lost to a field the person never touched.
Gender now clears on an empty string, the same contract every other
profile field documents, and an unsupported value is refused with a
message that names the field and its accepted values instead of the
validator's own prose. Onboarding validated against a narrower enum
than the profile schema and 422'd the whole submission; its form could
not record the third value at all.
The rest is the same defect in other clothes. The Strain model scored
an unanswered or OTHER account on the male Banister coefficients; it
now uses the midpoint of both published models, matching every other
sex-split formula here. The dashboard snapshot emitted null for an
account that answered OTHER, which is indistinguishable from no answer.
Three casts asserted a two-value type over a three-value column. All of
them now carry the stored value and narrow once, at the boundary of a
reference table that genuinely has no third row, through one named
helper in src/lib/profile/sex.ts.
Refs #645
The envelope was assigned after the loop, so the loop's IN_BED skip had
no observable effect - removing it changed nothing, which makes it a
dead branch rather than a guarantee. Assign the envelope first and let
the skip protect it.
A device can write the same period twice: an original envelope and a
corrected one, same start, later end, distinct external ids. Both rows
belong to the same writer, so the writer collapse keeps both, and the
per-stage totals added them. One night served a 10 h 13 min in-bed
headline next to a 20 h 17 min in-bed legend on the same screen, and
the hypnogram drew the night twice over.
Every per-stage total is now the measure of the union of that stage's
spans rather than the sum of the rows, and the same merged spans feed
the hypnogram segments and the time-asleep headline. Stages merge
independently: two stages describing one minute is a contest, and the
writer collapse is this file's mechanism for that - arbitrating again
would collapse the summary-shaped writers, which stamp every stage
total on the sleep end instant and nest by design.
stages.IN_BED is now the in-bed envelope itself, the same union
inBedMinutes reports, so the legend cannot contradict the headline and
a night whose envelope only a losing writer recorded still reports it.
The seven documented statuses are four kinds of thing, so they get four
rulings instead of one.
Taken and Skipped state a decision about a dose and each maps onto something
already recorded here — a row with a take time, and a row marked skipped. That
second mapping was checked rather than assumed: skipped is documented as a
deliberate skip and held apart from autoMissed, which is the marker for a dose
nobody ever acted on, and the compliance re-fold counts a skipped slot in its
own column and never as taken. So a deliberate skip arrives as one.
Not Interacted, Not Logged and Unspecified are absences rather than
statements. Written as taken they would invent a dose; written as skipped they
would invent a decision, because not answering a notification is not choosing
not to take something; written as pending they would put outstanding doses
from years ago in front of someone today. Snoozed describes what happened to a
reminder. Notification Not Sent is about the software. None of the five
becomes a row.
All five are refused, but each under its own name, because "the file says
nothing about this dose" and "this row is about a reminder" are different
things and a person acts on them differently. Three reasons where there was
one, each with its own sentence in six locales.
An inactive medication's history imports and the medication stays inactive.
Preserving what happened and putting a medication back on the active list are
two acts, and only the first belongs to an import.
Three things the tests said were covered and were not.
A column flipped from honoured to ignored moved both sides of its own
assertion, because the check read the verdict off the table it was checking.
The verdicts are now written out as literals, so changing one is a decision
somebody states twice.
The preview block was unreachable from an SSR-only test, so nothing would
have noticed it rendering through the outcome view — which would classify
what a preview *would* write as a success and put a tick on a run that never
ran. It moves into its own component that takes the verdict as a prop, the way
the CSV result view already does, and the preview and the archived-row report
are asserted directly.
The account-wide import narrows its in-progress check to account-wide jobs, so
an import running on one medication's page does not refuse it. Nothing pinned
that; now something does.
Also correct two comments about the earlier replay-key fault. The repeated
value in the reported file was not a dose quantity — it was copied from the
example this dialog itself displays. The field never carried identity, and the
submission was never at fault.
The dose-history import gets its own card in Settings, because the file
covers a whole regimen and the per-medication dialog on a medication's page
covers one medication.
Preview before writing. The dry run parses the file, matches every row
against the record, and answers with the whole verdict: rows read, rows that
would land, rows refused grouped by reason, and the medication names that
match nothing — verbatim, so they can be added and the file re-run. Nothing
is written until the second button.
The column rulings sit on the card before a file is chosen, one line each,
naming whether the column is used, reported, or not read and why. A column
read and dropped in silence is indistinguishable from a column honoured, and
that is how somebody comes to believe an importer looked at something it
never did.
Outcomes render through the same primitive the other three import surfaces
use, so a run that wrote nothing cannot carry a success tick. The preview
borrows the reason lines and deliberately not the outcome sentence: a preview
has written nothing, and classifying it by the counts it would produce would
put a tick on a run that never ran.
The fixture is the export a self-hoster attached, de-identified as it
arrived: 3,395 rows, sixteen medications, three and a half years, two UTC
offsets, three statuses, two units, blank cells in four columns. A
hand-built fixture would have carried one status and one offset and proved
nothing about the file that prompted the work.
The integration pass runs it through the real derivation into a real
Postgres, because the claim is about rows: 3,387 land, 8 are refused because
the file records no decision about them, and imported plus refused equals
every row read. 2,799 of the doses were taken after they were due, which is
the fact that survives only because the scheduled slot and the take are two
columns.
Structural cover so the verdicts cannot rot: every column of both shapes has
exactly one ruling, and every parse-time refusal is spelled the same as a job
skip reason — a reason that exists in only one vocabulary renders as "reason
not recorded", which is a refusal nobody can act on.
The intake importer took a hand-written list of dates and times for one
medication. A self-hoster with a ten-column export covering sixteen
medications and years of history was left translating it by hand, which is
where the scheduled time and the time a dose was actually taken get
flattened into one — the distinction the record wants most.
The export keeps them as two columns, so read the file's own shape.
`MedicationIntakeEvent` already models that pair as `scheduledFor` +
`takenAt`; an imported dose now populates both instead of anchoring itself
on the take. `Skipped` becomes a deliberate skip with no take time, which is
how every other skip path writes it. A dose whose actual amount differs from
the amount the schedule expected carries the difference as a per-dose
override; an unremarkable amount stays absent, which is what absent means
there.
Timestamps carry their own UTC offset (`+1030` and `+0930` on adjacent rows
of one file) and it is read literally: the epoch is computed from the stated
offset rather than handed to the platform's lenient date parser, and a value
without an offset is refused instead of assumed to be the server's zone.
An export covers a whole regimen, so the job is account-wide and each
payload entry names its own medication — migration 0276 widens
`medication_intake_import_jobs.medication_id` to nullable for it. The
per-medication route is unchanged and keeps naming its medication on the job
row. A medication is never created from an import file; unmatched names come
back verbatim so they can be added properly and the file re-run.
Every column gets a verdict, and `?dryRun=1` returns the whole one before
anything is written.
The intake import built its replay key from the row's optional `zaehler`
field. That reads as a per-row counter — the documented example showed one —
but nothing required it to be unique and nothing checked. A reported export
carried the dose quantity there instead: 1 tablet, on all 28 rows. Every entry
queued under the same key, one dose reached the ledger, and the other 27 came
back reported as duplicates of a dose they had nothing to do with.
The key is the instant now, and `zaehler` is out of the contract rather than
accepted-and-ignored. Nothing is lost by dropping it: the live-row unique on
`(user_id, medication_id, scheduled_for, source)` already makes an imported
dose unique per instant, so a re-import of a file first imported under the old
key still dedups.
The telling is the other half. Two different facts were counted as one number:
entries of a submission that collide with each other, and doses the ledger
already holds. They are separate reasons now, grouped with a count, and the
dialog renders them through the same classifier and the same outcome line as
the CSV and JSON import cards — so an import that wrote nothing can no longer
answer in success tone. That rule shipped for the settings import panel and
this surface was not part of it; the guard now lists every import surface by
path, so a fourth one has to be added deliberately. `skippedInvalid` is gone:
it was hardcoded to zero on every path and reported a capability the importer
never had.
Alongside it, the other half of the environment report — a scheduled job that
fails every run has to say so. `recordError()` increments one unnamed counter,
so the admin status page could show a number and not which queue produced it,
and the module's own screen showed a zero day count with nothing to
distinguish "nothing stored yet" from "every run failed". pg-boss has held the
answer the whole time: a job that exhausts its retries keeps its queue name,
its error and its timestamp. The admin status now names the failing queues
with counts and the last error, the environment overview reports its own
account's failed runs, and neither needed a change at any of the thirty
`recordError()` call sites — a visibility fix that has to be remembered per
call site is the same failure one level up.
Refs #650, #646
Migration 0217 created the type as `environment_location_source`; the
datamodel declared `EnvironmentLocationSource` with no `@@map`, so the client
compiled every write against `public."EnvironmentLocationSource"`. Postgres
answered 42704, the upsert rolled the transaction back, and the module sat at
"0 days recorded" from the day it shipped — one enum out of forty-nine, and the
only one without a map.
No migration follows. `prisma migrate diff` against a database built from the
committed migrations reports the enum rename and the `environment_contexts.source`
column rebuild before the map and nothing after it: the database was never the
side that drifted, and renaming a live type to match a datamodel typo would be
the wrong direction.
Two guards, because the two questions are different. The unit guard replays
CREATE TYPE / ALTER TYPE RENAME / DROP TYPE across the migration set and holds
every enum to a type that survives it. The integration guard compares all three
name classes Prisma emits — enum type, table, column — against a real migrated
Postgres, which is the only place a name mismatch is observable at all: it
survives generation, typecheck, and every mocked test untouched.
Refs #646
Mutation-checked against the production paths they cover: the escalation
verdict, the leg guard in `recordSyncSuccess`, the streak anchor the verdict
dates itself by, the status envelope threading it, and the pill's relative
timestamp.
Also give the four legacy per-provider status routes the verdict the
consolidated envelope already carries. They answered `connected: true` plus a
`state` string and nothing else, so a client reading one of them saw a live
connection over a pipe that had delivered nothing for weeks.
A sync failure the classifier bucketed as `transient` had no exit. The park
test read `kind === "persistent"` and the persistent streak anchor was only
ever stamped by a persistent failure, so a streak could run for a thousand
attempts with the persistent counter at zero, the state frozen at
`error_transient`, and no ladder it could climb. `transient` is a hypothesis
about retryability, and the classifier defaults every timeout, 429, 5xx and
unrecognised response to it precisely because the wire cannot tell a reboot
from a permanent break. That default is right for one attempt and wrong for a
thousand: an unbroken streak retried hourly for a full day has refuted it by
experiment. Record it as `persistent` from there, which feeds the park ladder
that already exists — 48 h of unbroken failure end to end before an
integration stops attempting.
The counters could not accumulate anyway. `IntegrationStatus` is keyed
(user, integration) while Withings runs four legs on four crons and WHOOP four
resources on four more, and a success cleared the error, every bucket, the
streak anchor and the state whatever leg had recorded them. The ECG tick at
:41 wiped what the sleep tick recorded at :15 — including a reauth park — so
the strike ladder was reset several times an hour and the card painted a green
"connected · 12 minutes ago" over a data class that had stopped arriving. A
success now clears only what it is entitled to clear.
Two columns carry it: `failing_since_at` dates the streak, `failing_leg` names
its owner. The migration backfills the anchor for rows already in an error
state so a connection broken for weeks escalates on its next attempt rather
than restarting its clock.
The defect is about rows that survive, so a mocked client proves nothing. The
new integration test seeds a row into every table in the schema, driven by
information_schema and pg_constraint rather than a fixture, runs the wipe and
asks the database what is left. A table added later is seeded and asserted
without anyone remembering to.
It holds all four halves: nothing in the wipe list survives, everything in the
exemption list does, everything reached only by a database cascade is gone,
and the account row comes back reset but able to sign in. A second file pins
the allergy and checkup-reminder deletes actually removing their row.
The reproductive-health note gains a Deletion section. It taught people to
reason carefully about a host being imaged and never said what pressing
delete does; now it says which of the three deletions removes the row and
which only hides it.
The nightly tombstone purge asked for `deleted_at IS NOT NULL AND deleted_at
< cutoff` and the audit-log purge asked for `created_at < cutoff`. Neither
predicate had an index behind it: every deleted_at index in the schema is
partial on IS NULL, the live-rows predicate, and every audit_logs index leads
with user_id or action. Both purges planned a sequential scan and then paid
index maintenance per removed row, in one unbounded statement, on a
connection carrying statement_timeout=60000. Past a certain backlog the
statement aborts, the transaction rolls back, nothing is purged, and the next
night runs the identical statement against the same rows. The mechanism that
gives deletion a horizon could not close on the instances that needed it.
Migration 0277 adds the indexes the predicates ask for; the three tombstone
ones are partial on IS NOT NULL, so on a healthy instance they cover only the
tombstones and shrink as the purge drains. The purges now walk the backlog in
batches of 5 000 by primary key, capped at 200 000 rows a run.
Both handlers used to swallow every error into a wide-event warning and
return, so pg-boss recorded a successful job either way: a purge failing
every night looked exactly like a purge with nothing to do. They now rethrow,
and a run that stops at the cap records that a backlog remains.
The wipe deleted thirteen tables against a schema that carries more than
eighty user-scoped ones. Mental-health assessments, lab results, the
menstrual record, allergies, family history, the document vault, every AI
conversation and live clinician share links all survived a confirmation
that promised to permanently delete all health data. So did
MeasurementRollup, the per-day reconstruction of the measurements the same
transaction had just removed.
The list now lives in src/lib/data-wipe/wipe-plan.ts next to its own
exemption list, and a structural guard enumerates schema.prisma and fails
when a model belongs to neither. Adding a model can no longer widen the set
of things that survive a wipe by default. The same guard covers the User
row's own columns, which had drifted the same way.
The boundary is explicit: everything the account owns goes, except what is
needed to sign in again. The confirmation and the toast say so before the
person types the confirmation rather than after.
Checkup reminders and allergies promised permanence over a soft delete with
no restore path; both now hard-delete, so the dialog is true. The lab
biomarker dialog was checked and is already accurate — it maps to the
hard-deleting /api/biomarkers/[id] route, not to the soft-deleting lab
result route.
Every entry in the display-transform registry declares the decimals its
unit is read at. That number was carried to the render layer and read by
exactly one screen out of all the ones that show a converted value, so
everywhere else the raw product of a kilogram and 2.20462262185 reached
the surface. Pounds came out with a dozen digits it never needed.
Move the rounding into `applyDisplayTransform` and
`applyDisplayTransformDelta`, so a surface gets a correctly-scaled number
whether or not it remembers to ask. Patching the weight cell would have
left the same trap behind inches, Fahrenheit, miles per hour and miles.
Two boundaries stay exempt and are documented as such. A transform that
does not rescale is the exact identity and is never rounded, so a stored
78.45 kg keeps rendering as 78.45 on the metric branch and every
untransformed metric is byte-identical. `invertDisplayTransform` — the
entry boundary — keeps full precision, because a value rounded on the way
out and inverted on the way back would drift the stored canonical number
a little further on every save; the entry surfaces quantise to their own
two-decimal canonical dialect instead.
`applyDisplayTransformUnrounded` is the one documented escape hatch, for
arithmetic whose result is not rendered. The target adapter needs it: its
guardrails round inward, and rounding the 30 kg floor to the nearest
tenth of a pound first gives an edge that inverts to 29.98 kg and the
server rejects it.
The weight page and the HealthKit scaffold were folding the factor into
their stat strips by hand. Both now convert through the helper, so the
raw multiplier is only ever handed to the chart, which owns its own
series and formatting.
Formatting is unchanged. Precision is fixed at the conversion and the
surfaces keep the formatter they already used, so switching preference
changes the unit and nothing else about how the number looks.
Refs #627
The scope picker arrived with the standard doctor's report already ticked,
so someone who opened the panel and pressed Generate sent material they
never chose. Nothing is selected now until a person selects it.
The template keeps its definition and loses its automatic application: it
sits on a button at the top of the picker, named, on both surfaces that
mount the picker, and it stays there so the standard set can be restored
after experimenting. One click still gets a complete doctor's report.
Generate and the share-link create refuse an empty scope, with the scope
line beside them saying what to do rather than reporting a failure after
the press; the line also describes the control, so the disabled state is
not silent for a screen reader.
The root layout shipped the active locale's catalog as `<script defer>` and
counted on it executing ahead of Next's hydration scripts. It does not: Next
emits its own chunks as `async` tags AHEAD of anything the layout renders into
`<head>`, and an `async` script runs the moment its fetch settles. So the
370 KB catalog was racing the app bundle, and on a cold load it lost about a
third of the time — `load-locale` initialised with an empty cache, every `t()`
in the hydration render returned its raw key against the server's real text,
and React tore the tree down with a text hydration mismatch. The user saw a
frame of `nav.skipToContent` before the provider's backfill landed.
Register the catalog through `next/script` at `beforeInteractive` instead.
Next's own bootstrap awaits those scripts before requiring a single app module,
and pairs the registration with a `<link rel=preload>` so the download still
starts with the document rather than after it. The CSP nonce rides along, so
the posture is unchanged.
Fold the boot global into the cache lazily rather than snapshotting it at
module evaluation. The snapshot made correctness depend on an ordering the
module cannot see; reading on demand reduces the invariant to something local
and testable — whatever the boot script assigns is visible to the first `t()`
that asks, whenever it lands.
Measured on the dashboard render spec, 30 repeats per project against a
production build: 11 of 30 failed on desktop before, 0 of 60 after.
Everything on that page is server-rendered, so a row is visible long before
the client boundary that owns it is live. A chevron click landed on inert
markup about one run in four, and a `boundingBox()` occasionally came back
null because the node had just been replaced.
The page is one client boundary carrying the export panel and the sharing
card, so the sharing card's own query is a sound signal that the surface is
wired. One helper opens the page and waits for it; every case on that route
goes through it, including the disclosure case that was already doing this
by hand.
Three of the picker assertions resolved to two elements and failed strict
mode; they now name the export mount, and a new case pins that each mount
carries exactly one of every id the picker renders.
The included-data disclosure case asserted a collapsed first render. The
panel opens on a first run on purpose — that is the only place the standard
template is applied, and a template behind a closed disclosure is opt-out
wearing a hat — so the case now asserts the contract that replaced it: open
on first render, and still a disclosure, closing and reopening under the
same control.
Settings → Gesundheitsakte mounts the one scope picker twice: the export
panel at the top, the share-link create form under `#sharing`. Sharing the
component is deliberate, but it also meant every test id inside it resolved
to two elements on that page, so nothing in the picker could be addressed
without guessing which one you got.
The picker now takes a required `surface` and every id under it ends with
that surface — `report-group-row-vitals-export` and
`report-group-row-vitals-share` are two controls and read as two controls.
The summary line beside each picker follows the same rule. A third mount
picks a value and stays addressable by construction.
The capability descriptor named `fhir:read` as the scope a narrow token needs
for the REST face. No code path mints a token carrying it — every mint grants a
wildcard, the medication ingest scope, or an MCP scope — so the face is
reachable by the owner's cookie session or a wildcard device token and by
nothing else. Advertising an unobtainable credential invites a client to go
looking for one. The constant stays where it belongs, as the fail-closed check
each route makes; the descriptor now reports the fact instead.
End-to-end coverage for the scope picker: the first run opens it expanded with
the fenced tier rendered and no group control over it, a group row clears the
44 px floor at 390 px, and a leaf grid opens from its chevron. All on stable
test ids rather than text a breakpoint can hide.
Migration 0273 revokes every live record share link minted before the selection
model, because their frozen scope was "everything except mood and cycle" — a
scope nobody chose. The owner has to see why the link stopped and be able to
replace it without retyping what they already decided, or a deliberate closure
reads as a fault. The list now names that state, says why in one sentence, and
offers a replacement that carries the label, the window and the lifetime
across, leaving exactly the decision that link never carried.
Writing the test for it found a defect in the picker. The group count and the
group checkbox read the catalogue's group rather than the leaves the surface
actually renders, so on the share-link form — where the insurance leaf is
hidden because the server refuses it — the identity row read "1/2" and drew
itself half-selected over a leaf the owner could neither see nor reach, and its
checkbox would have tried to add it. The three helpers take the rendered leaves
now, so a control cannot describe more than it offers.
Two downloads under the token — the FHIR document Bundle and the clinical PDF —
behind the same unlock cookie the document route enforces, serving exactly the
link's frozen selection. That is what the removed FHIR toggle promised, in the
form a practice actually uses: open the link, unlock it, save the file. No new
credential type, no new scope, no mint path that does not exist.
The gate is the document route's, step for step: the same live check, the same
token-scoped cookie, the same blunt 404 for every miss class so a probe cannot
tell "no such link" from "revoked" from "documents-only". It differs in one
number, because generating a bundle is far more expensive than serving a stored
blob and must not share a budget with it. Each download writes its own audit
row. The scope cannot exceed the page's: both resolve the same frozen leaf list
through the same resolver, and the insurance leaf is refused at create, so the
insurance number cannot reach this path at all.
The MCP doctor-visit summary stops claiming presence it cannot support. An
account whose owner never saved a report selection resolves to the empty one on
that surface, and an empty scope produces an empty payload — which now reads as
{ present: false, reason }, the same sentinel the other reads use, instead of a
record with every section quietly missing.
Mutation-checked: removing the unlock check, the rate limit, the documents-only
guard or the audit row reddens its own case; pointing the bucket at the document
route's key reddens the bucket assertion; making presence unconditional reddens
the absence case.
The saved profile's shape moves out of the module that reads the row. The panel
is a client component and parses the blob from the /me payload; importing the
reader dragged the database client into the browser bundle, which typecheck and
the unit suite both pass and only `next build` catches.
Five layers, because the defect had five places to hide.
The catalogue guard checks what the compiler cannot state: every leaf resolves
a label a human can read, every group resolves one, the fenced tier stays last,
and the shipped template intersects the fence at nothing.
The selection guard pins the three minting functions against each other. A
stored blob this build cannot read resolves to the empty selection, never to a
default set — that is what makes the revoked legacy links revocable rather than
silently re-scoped. A request naming an id the server does not know is refused
by name rather than dropped, because dropping it would narrow a scope the
caller did express.
The egress guard freezes the set of aggregator callers with the source of each
one's selection written down. The required brand-typed parameter already stops
a new path compiling without an answer; this stops one being added without a
human writing the answer down, which is the moment a reviewer asks the
question.
The behavioural sweep aggregates every leaf in and out against a fixture that
carries a row for each, and asserts the payload differs. It is parametrised
over the catalogue, so a leaf added later is covered the day it is added. Its
positive control asserts the all-on payload is genuinely populated first, so a
"no difference" result means the gate is inert and not that the account is
empty. Beside it: an unmapped measurement type is excluded rather than passed
through, no table behind an unchosen leaf is queried at all, and an empty
selection produces an empty record.
The artefact layer runs the real route and reads what comes out — the FHIR
bundle, the PDF text and the zip's contents — with a positive control beside
every exclusion.
Mutation-checked: making the gate admit everything reddens the sweep for every
leaf; passing an unmapped type through reddens the fail-closed case; dropping
the mood query's condition reddens the zero-read case; returning the BMI
unconditionally reddens the sweep naming BODY_MASS_INDEX; adding a fenced leaf
to the template reddens the purity guard; removing the panel's seeding block
reddens the first-run and repeat-run cases; dropping the insurance refusal
reddens the share-link case; adding a caller outside the frozen list reddens
the egress guard naming the file.
The panel suite grew past the practice name it was written for and is renamed
for what it now covers: the three states, the fenced tier having no group
control, and the scope line naming its sensitive inclusions.
Integration coverage moves to the leaf model, including the case this release
exists for: an account with data in every domain and a caller that named
nothing gets an empty record.
The OpenAPI contract catches up with the routes — the required selection, the
refused keys, the share summary's new fields, the moved `Patient/$everything`,
the Coverage search and the five typed reads.
The export panel rendered twenty flat switches behind a collapsed disclosure,
and the share-link form rendered none at all — it posted whatever the create
schema defaulted to. Both now mount the same picker: twelve named groups, a
count on each, the leaf grid one chevron away, and a fenced tier below a
separator.
The fence is mechanical, not a label. The sensitive tier has no group
checkbox, so no single control anywhere in the picker can turn on more than
one of mood, cycle, family history, PHQ-9, GAD-7, WHO-5 or SCI at a time.
There is no select-all. The shipped template contains none of them. And the
scope line under the button restates every sensitive inclusion by name rather
than folding it into a count, because a number cannot be checked at a glance
and "incl. Mood, PHQ-9" can.
First run opens expanded with the named standard template applied and the
fenced tier visibly empty, so the user presses Generate having seen twelve
named groups. Every later run opens collapsed carrying their own last
selection, which makes the waiting-room path two interactions.
Only leaves are ever stored. A group's checkbox is derived from its leaves, so
the two cannot disagree, and switching a group off and back on inside one
session restores the pattern instead of flooding it.
The cycle export card is deleted. It posted empty groups under a docblock
claiming every other section was off, and empty groups resolved to the
defaults — so a "cycle only" download carried weight, blood pressure, pulse,
oxygen saturation, body fat, body composition, the medication list, adherence,
labs, allergies and family history. Cycle is a fenced leaf in the one picker
now, reachable for the PDF as well as for FHIR, which is more than the card
offered.
The panel gains a 30-day preset and a custom window, and its error line says
what went wrong instead of interpolating a status code.
The Checkbox primitive learns the indeterminate state it already had the Radix
support for. A partly-selected group drawn as unchecked would say "none of
this is included", which on this surface is a false statement about what
leaves the instance.
The report resolved an absent key to "included". A caller that sent no
sections object, or an empty group inside one, received the full record at
server-chosen defaults: roughly fifty metrics plus the medication list, labs,
allergies and family history. The web panel sent every key explicitly so it
looked fine from the browser, but the share link, the FHIR REST face, the MCP
doctor-visit resource and the cycle-only export card all went through paths
where absence meant yes. No arrangement of booleans fixes a default that means
yes, so the shape goes.
A selection is now an inclusion list of leaf ids. A leaf is the smallest thing
that can be released or withheld: every measurement type, and thirteen
structured sections — identity, insurer, the glucose panel, labs, the drug
list, the administration ledger, adherence, the GLP-1 block, allergies,
illness episodes, family history, mood, cycle. Membership is inclusion,
absence is exclusion, and there is no defaults constant anywhere to drift.
Three locks keep a metric added later off a report chosen earlier. A stored
selection is a list of what was chosen, so a leaf that did not exist then is
not in it. The catalogue is keyed over the measurement enum, so adding a
member without deciding its group fails typecheck in the same commit. And the
aggregator's filter inverts: a type the catalogue does not know is excluded and
annotated, where it used to be passed through.
The aggregator's third parameter is now required and brand-typed, which turned
the three surfaces that had no scope at all into compile errors. Each one had
to name a source, and each now replays the owner's saved selection — the same
object reviewed in Settings. An account that never saved one gets nothing
there rather than a guess.
Identity and insurance become selectable, and a share link refuses the
insurance leaf outright. The share view never decrypted the number; that is
structural now instead of incidental. The KVNR is not even read unless the
leaf was chosen.
Two surfaces gain a record they always implied. A share link serves its frozen
selection as a FHIR bundle and as the PDF, behind the same unlock cookie the
document route uses, with its own rate bucket, its own audit row and the same
blunt 404 for every miss. That is what the removed FHIR toggle promised, in
the form a practice actually uses.
The AI summary leaves the report. Its text came from the cached briefing with
no relation to the selection, so its scope could not be proven, and prose whose
scope cannot be proven has no place on a document whose whole point is a proven
scope.
The PDF table stops being a nine-type whitelist. It prints every selected leaf
that has data, sub-headed by group, in the same order the panel shows — so
selecting resting heart rate no longer means seeing it in the bundle and not in
the PDF. The clinician view is grouped the same way and reads real labels
instead of "Phq9 score".
Migration 0273 adds the saved-selection column, drops the orphaned prefs column
and the two retired share-link scope columns, and revokes every live record
share link minted before this model. Their frozen scope was "everything except
mood and cycle", which is a scope nobody chose; narrowing it would still be a
scope nobody chose. Documents-only shares are untouched. The sharing list shows
each closed link in a pick-again state with its label, window and expiry kept.
The retired allowFhirApi and resourceTypes stay on the create and list
responses as the constant false and empty list. The request refuses them. They
come off the response once the native client confirms it does not decode them.
Six files are split at seams this change already touched: the aggregator into
its gate, its dense-bucket query, its series, its glucose panel, its medication
ledger and its clinical records; the export route's three emitters into their
own module; the clinician view into its sections, its document list and its
downloads.
Two layers, because the defect had two halves and each needs its own kind of
proof.
The structural guard walks the panel's control shape, folds every control
through the wire schema and the resolver the route uses, and fails when
flipping one changes nothing in the resolved selection. It also checks the
panel renders a row for every control it declares, and that every resolved
flag is read downstream, either by gating measurement types or by name in the
aggregator. That is the link nobody had written: the dead switches were dead
for several releases and no test connected "the panel renders this" to "the
export honours this".
The behavioural half runs the real export route and reads what comes out. The
previously-dead measurement switches are asserted against the FHIR bundle and
the PDF table, with a positive control beside each exclusion so nothing passes
on an empty fixture. The screening totals are asserted absent for a caller
that names other sections and for a caller that sends no sections at all, then
present when asked for by name. Allergies and family history are asserted
absent from the bundle and never read from the database, and the package case
opens the zip and checks the bundle inside it agrees with the PDF beside it.
Mutation-checked: reverting the allergy gate, the medication-list gate, the
screener entries or the measurement entries turns the matching cases red and
leaves the rest green; removing a control's fold entry or its aggregator entry
turns the guard red with the control named.
The remaining changes update fixtures the new shapes touch: prefs objects now
resolve the added flags from the defaults, and the share-link fixtures drop
the retired FHIR scope, with a case pinning that the create route now refuses
those keys instead of ignoring them.
The export panel rendered twenty data switches and eight of them changed
nothing. The grouped selection folded down to twelve flat flags and dropped
oxygen saturation, body fat, body composition, resting heart rate, HRV, VO2
max, steps and distance on the way, so a user who switched any of them off
still exported the readings in the PDF, in the FHIR bundle, in the package,
through a clinician share link and over MCP. Each one now resolves to a flag
the aggregator reads, and the rows are excluded at the query rather than
fetched and dropped.
Three more controls were untruthful in their own way:
- The medications switch documented itself as excluding all medication data
and excluded the adherence figures only. The drug list and the per-dose
administration ledger rode along regardless. Both follow the switch now;
the rows are still read, because compliance and the GLP-1 block are computed
from them, and they no longer leave the aggregator.
- Allergies and family history were gated for the PDF and fetched
unconditionally for the FHIR bundle, so a package could carry a compliant
PDF and a violating bundle in the same zip. The reads are gated, and a
deselected section is not read at all.
- The PHQ-9, GAD-7, WHO-5 and SCI screening totals had no per-report control.
They rode the mental-health module alone, which has been default-on since
v1.29.1, so depression and anxiety screeners reached FHIR bundles, share
links and the MCP doctor-visit resource on accounts that never chose to send
them. They get their own section key, defaulting off, with the module gate
kept as the second lock, and the stale privacy-by-default comment that
argued otherwise is corrected.
The share link's FHIR promise is removed rather than implemented. The create
form offered a toggle and a resource-type picker, the values were persisted
and badged on the finished link, and the API description called the toggle a
REST reachability switch, while no route has ever answered a share token with
FHIR or any other machine-readable format. Serving one is a feature with real
security surface and does not belong in a correctness fix. The toggle, the
picker, the badge and both claims are gone; the create schema rejects the two
keys instead of accepting and ignoring them; the columns stay, unread, so no
data is destroyed to undo a promise.
Two files are split along seams this change already touched. The
measurement-type gating maps and the filter that reads them leave the
aggregator for their own module, so the query gate and the output gate cannot
disagree; the export panel's control shape and the selection it builds leave
the component, so the selection contract can be extended without the
rendering. Three accepted-and-discarded wire keys (activity energy, GLP-1,
side effects) are dropped: nothing rendered them and nothing read them.
A spec that arms `page.route(...)` in a `beforeEach` and never drops the
handler races its own teardown. The context closes, an async handler is
still awaiting, its next call rejects with "Test ended.", and Playwright
attributes that to the test that had just passed. With `retries: 2` plus
`failOnFlakyTests`, which spec bites is a matter of timing.
`e2e/setup/test.ts` re-exports Playwright's `test` extended with an auto
fixture that unroutes every page and the context after each test, and
clears the page event listeners a spec subscribes to; `expect` rides
along so a spec needs one import. Auto means a spec author cannot forget
it and does not have to know it exists. Every spec now takes `test` from
there, and `e2e-route-cleanup-guard.test.ts` keeps the import boundary
closed with an allowlist that carries its reason.
The per-file `afterEach` on the cycle spec goes away — leaving both would
read as not trusting the fixture.
Not covered: a page inside a context a spec builds itself. Only
`share-documents.spec.ts` does that, and it owns those contexts.
A HealthKit blood-glucose sample carries no context either — the mapping has
no field for one — so the batch ingest was building the same row the old
CHECK refused. Fold that source into the case that pins the contextless
shape.
Refs #640
The example CSV is the file people copy. It showed a glucose row with a
FASTING context and nothing else, which is the shape a meter produces, not
the shape a continuous sensor produces. It now carries both.
Refs #640
Same shape as the CSV and JSON cards: reaching the done state rendered the
success tick whether or not a single row was upserted. The archive's count
picks the tone now, and an archive that wrote nothing says so.
The clinical-record count stays out of that decision. Skipping
electrocardiograms and lab documents is a documented, deliberate exclusion,
not a refused row, so it must not read as a warning.
Refs #640
A CSV import of a continuous-sensor export wrote nothing and rendered a
green success state. Three faults compounded, and the reporter took all
three apart before filing.
The parser refused every BLOOD_GLUCOSE row with a blank glucoseContext.
Behind it, the CHECK constraint from migration 0021 read both ways at
once: a glucose row MUST carry a context, every other type MUST NOT. The
second half is right and stays. The first was written when the only
glucose writer was the entry form, where a person picks fasting or
post-meal at the moment of the reading. Every machine writer that
arrived since has no such answer per sample, so the Nightscout pull, the
MCP log tool, the Telegram capture and both bulk importers were all
building rows the database then refused.
A missing context now stores as NULL, never as a fifth enum member.
Every per-context reader selects by equality against the four members,
so the reading stays out of the doctor report's fasting rows, the
matching FHIR observations and the per-context targets, while the chart,
the all-time summary and the clinical panel keep it in full. Hand entry
still asks for a context, because at that moment you know it.
The import cards now read the counts rather than the status code.
Nothing written is a failure, a mixed file is a warning, and the refused
rows are grouped by reason with a count instead of fifty identical
lines, with the per-line detail one disclosure away. Both cards render
through one outcome table, so a tick cannot reach a result that wrote
nothing.
Refs #640
`medication_intake_events.idempotency_key` carried a GLOBAL unique from
0001_init. The value is client-supplied, so two people running the same
client can mint the same key — and on a global unique the second one is
simply refused by the constraint. Their dose is not written and nothing
tells them so. The bulk drain made it worse: its replay probe read the
key with no user scope, resolved the first user's row, and reported the
second user's entry as a duplicate carrying a stranger's row id.
Migration 0273 replaces the global unique with `(user_id,
idempotency_key)`, the grain every other client-supplied identity on the
table already uses. Both unscoped reads in the bulk drain now key on the
composite; the other four reads were already narrowed by user.
On existing data this is a relaxation, so nothing needs reconciling: the
old constraint is strictly stronger than the new one, and no pair of rows
can violate an index the previous one already forbade. The migration
still carries a reconciliation step for a database whose global index was
dropped by hand at some point. It never deletes or rewrites a dose — it
clears the dedup HINT on the later row of a colliding pair and keeps
every intake event, timestamp, attribution and inventory stamp intact.
The new index is created before the old one is dropped, so a failure
aborts with the old protection still in place.
A structural guard freezes the read side: no `medicationIntakeEvent`
query may filter on the key without narrowing by `userId`.
The dedup key on the medication intake surfaces is not only `externalId`.
`MedicationIntakeEvent.idempotency_key` is a `@unique` column persisted
with the dose row forever, with no TTL and no sweep, matched by plain
equality on the per-medication POST, the bulk drain and the external
ingest bridge. That makes it an identity, not a replay token, and it
carries the same failure mode: a key that rotates per client launch never
matches its own earlier post, so every retry logs the dose again. The
blank case is sharper still — the column is unique table-wide, so an
empty key resolves to whichever unrelated row stored it first. Refuse
both shapes at the schema on the single-entry paths and per entry on the
bulk drain.
The MCP write path hashes a host-supplied key into the `externalId` half
of its dedup key, so the shape is laundered before anything downstream
could see it and the check has to run on the input. That closes a live
one: every tool handler falls back to `""` when the host omits the
argument, and `""` digests to a constant, so each keyless write after the
first reported `already_logged` and was silently dropped.
The HTTP `Idempotency-Key` header stays out, and now says why in the
guard: `IdempotencyKey.expiresAt` bounds it and the cleanup job sweeps
it, so it is a windowed replay token and rotation is its design.
Extend the structural guard with a provenance rule for identities that
never pass a Zod request schema — a spreadsheet column, an MCP tool
argument. Inside the import and MCP trees, a module handling an identity
must apply the floor itself or import a module that does. That is a real
chain rather than a list of known offenders: a new importer that mints an
`externalId` from file input and imports nothing checked fails it, with
no allowlist to escape into.
Harden the structural guard so it reads the file body with its imports
stripped: grepping the raw source cannot tell a file that APPLIES the
check from one that merely imports it, so deleting the call while
leaving the import slipped straight through.
Add the partial-success case on a second batch envelope — the mood bulk
ingest echoes the offending entry back with its index, status and
reason while the good rows still upsert.
An external id is half of every ingest dedup key — (userId, source,
externalId), (userId, externalSource, externalId), (userId, type,
source, externalId). Re-posting the same triple is idempotent and
returns the existing row, which holds only while the id is stable
across client launches. A client that serialised an opaque platform
object with its default object description sent a per-allocation
memory address instead, so no sweep ever matched its own earlier row
and each one minted a fresh record: a live instance grew 23 phantom
medications in a day, none of which could collect a dose, because the
dose side resolved through the same rotating string.
Add one shared classifier for identifiers that provably cannot be an
identity — an angle-bracketed object description carrying a hex
pointer, a bare 0x address, and a blank value — and wire it at every
surface that accepts a client-supplied externalId.
Single-entry creates refuse through the schema, so the client gets the
standard 422 multi-issue envelope with a message naming the shape it
sent and what to send instead. Batch and bulk surfaces classify per
entry and report the offending row as skipped with reason
unstable_external_id, leaving the rest of the payload to land: one bad
row must not stop a sync. Every refusal carries pinned wide-event meta
(count, shape, surface) and never the id itself.
A structural guard freezes both routes into the floor: a request-side
externalId declaration either applies the field check or carries a
marker naming the file that checks it per entry, and the guard verifies
that file really does. The backup-restore payload is the one exemption,
with its reason recorded — it replays ids the server itself wrote.
Whether a column has a reader anywhere in the tree is a whole-program property,
and grep is the only cheap approximation. Grep is unsound both ways here:
generic names match unrelated identifiers and read as consumed, while
consumption through a select-less read plus whole-row serialization reads as
unconsumed. A gate built on that would drift towards green and stop meaning
anything, which is the failure this whole line of work exists to prevent. So it
stays a review tool with a human reading the output, run from the deep-audit
step and never in CI. The script says so itself and prints the false-positive
sources under every run.
It also carries the convention that makes the tool useful: a change that adds a
column, payload field, or preference contains its consumer, or the schema
comment carries `@internal` for something deliberately never surfaced or
`@pending-consumer(#issue)` for one still coming. The second marker is
re-listed on every run, so a follow-up that never happened surfaces at the next
release audit instead of never. Recorded in the contributor notes alongside the
two questions that are exact enough to be gates.
Every finding behind this work is a two-ended change whose ends shipped in
different releases with nothing holding them together, and every gate the repo
runs proves one end: typecheck proves the export exists, knip proves it is
imported, the OpenAPI check proves the schema matches. None of them notice when
the second end never arrives.
Two questions here can be answered exactly, so they become tests.
The account endpoint rides every app boot and carries the user's preferences.
Its field names are read out of the response literal and each one must be read
by a client module — property access or destructuring, comments stripped,
because a doc comment claiming a consumer is what the remembered practice name
had for its whole dead life. That field would have failed this on the day it
shipped. One field is allowlisted today with its reason written out: the
insurer institution number has no web surface at all, which the entry keeps
visible rather than papering over.
The measurement backup select is now a named constant, compared field by field
against the model in the schema. Both sides are literals, so the comparison is
exact — no name heuristics, nothing that can drift towards accepting. A column
added to the model and forgotten by the backup fails at the commit that adds
it, which is how the aggregation provenance went missing. Scoped to the one
model; extend it as each further model becomes backup-relevant.
The reverse-coverage guard asserts that every key in the bundle is reachable
from a call site. It had stopped doing that for most of the bundle. A template
whose only static anchor was a namespace root registered that root as a subtree
base, so a single per-provider OAuth key marked every key under `settings.*`
reachable, and the same shape did it for `measurementReminders.*`. A cache-key
string that happens to start with a namespace word had quietly done it for
`insights.*` too. The guard stayed green throughout, which is the part worth
noticing: a pair guard degrades into a one-end guard without any signal.
Extract the matcher into a helper with its own unit tests, and change what it
accepts. A template carrying both a literal prefix and a literal suffix now
records the pair and requires both ends to match, so the OAuth template covers
the provider keys and nothing else. A template with no suffix whose anchor is a
bare namespace no longer whitelists anything — it fails the guard by name, with
the two honest remedies in the message. The same door is used by the template,
assignment and concatenation arms, so none of them can reopen it. Template
bodies are read by scanning forward from a known opening backtick rather than
by pairing backticks across the tree, which was drifting and dropping whole
files out of the scan.
Three call sites build their keys whole instead of interpolating onto a
namespace root: the two measurement-reminder due helpers, the mental-health
option labels, and the OAuth error copy, which now names its per-provider base.
Two audit-log action names that merely look like keys carry a written
exemption; the API error catalog is a runtime lookup and is allowlisted with
its reason.
With the matcher honest, 149 keys had no call site left. They belong to an
explainer popover, a hypnogram, a passkey table and an insights hero that were
all rebuilt or removed, and they are deleted from all six locales. The
explainer guard stops pinning its title leaves, which no surface has rendered
since the popover went.
The disaster-recovery backup selected every Measurement scalar except the
aggregation fields, so a restore brought every `stats:` aggregate back with no
provenance and the Apple Health authority ladder came back flat: an export.xml
source-day estimate could then overwrite a native HealthKit statistic.
`aggregationProvenance` now rides the select, the disaster-recovery
serialization, the payload schema and the restore mapping, following
`externalSourceVersion` exactly — including staying out of the reduced
portable shape, which carries the human-readable subset only. The schema field
is optional, so every backup written before this parses unchanged.
Restoring one of those older backups no longer recreates the ambiguity
migration 0263 repaired: an Apple Health row under a `stats:` identity with no
provenance comes back as LEGACY_UNKNOWN, the sentinel the cumulative drain
already writes in that situation, so a native sync or archive reprocess can
repair it. The gate is scoped as 0263 scoped its backfill — other providers
mint `stats:` identities for their cumulative dailies and have never carried
provenance, and ordinary point rows keep NULL.
Migration 0263 added three columns beside the Apple Health `stats:*`
authority ladder. Only `aggregation_provenance` is ever read back: the
external-measurement reconciler selects it and refuses a lower-authority write
against a higher-authority canonical row, and the cumulative drain reads it
too. That column stays.
`aggregation_contributor_count` and `aggregation_selected_source_hash` are
written by three call sites and read by none. No select, no raw SQL, no export,
no backup, no API contract, no repair path. The import-time selection keeps its
deterministic tiebreak, which compares an in-memory map key computed per flush
rather than a value read back from the table.
Both are plain nullable scalars with no index, unique, check or foreign key, so
the drop is a catalog-only operation that touches no measured value.
The doctor-report contract has always described the practice / clinic name as
a stored preference, and `/api/auth/me` has returned
`User.lastReportPracticeName` since it shipped, but nothing ever wrote the
column. Every report asked for the clinic name again.
The export route now persists the sanitised name after the requested artefact
has actually been produced, so a generation that throws cannot overwrite the
remembered value with a half-typed one. Clearing the field persists null, which
keeps the cover line cleared next time. The export panel seeds its input from
the auth payload during render, gated per user id, so a late resolve never
clobbers a field the user is already typing into, and a finished export
invalidates the cached payload so a remount reads the new value.
Interface housekeeping. The overview sections drop their hand-rolled card
frames for a shared shell with one inner rhythm, failed reads on dense metric
pages get a named row primitive that puts the message in the content tier, and
the last off-scale spacing and text sizes go back onto the scale.
The tag chip and the sub-twelve-pixel text step are primitives now, so neither
can be hand-copied at a slightly different value again.
The stage-composition chart card was the last insights tile with a
hand-rolled title row. It now uses the canonical header primitive; the
subtitle and the window toggles keep the shape they had, since the toggles
have to drop to their own row on a phone.
Also sweeps the last off-scale spacing: the two dense tiles inside a
recommendation move onto the sanctioned inner-tile step, and the not-found
button onto the scale. The banned twenty-pixel step is now absent from the
tree. The chart body is untouched.
Seven overview sections had hand-rolled the same card literal, and the copies
had already drifted on the one thing the literal did not pin: the space
between blocks. Three used 12 px, two 8 px, one 16 px, one under the other in
the same column.
`InsightSectionCard` composes `Card`, so the frame comes from the card
contract, and fixes the inner rhythm at 12 px. The daily briefing moves onto
it as well, and the lab-changes list keeps its edge-to-edge rows through the
documented flush variant.
Visible change on the overview column: two bodies open by 4 px, one tightens
by 4 px, and all of them pick up the shadow their card neighbours already
had. Chart bodies are untouched.
The HealthKit metric sub-pages and the vitals dashboard had each hand-rolled
the same failed-read row, byte for byte. The tall centred error card is the
right shape for a list surface but dominates a dense metric strip, so the row
stays — as a named primitive rather than a third copy.
`QueryErrorRow` carries the shipped shape with one correction: the failure
message renders in the foreground tier. An alert is the content of a failed
surface, not meta about it, and both copies had it muted. The retry glyph
matches its tall sibling. Both converted surfaces pass their existing slot
names through, so their hooks are unchanged.
Three integration cards carried the same hand-copied chip literal in the
card-header accessory slot, each free to drift on the next touch; the size
itself was an arbitrary value repeated at three slightly different spellings
across the tree.
- Mint `--text-2xs` (0.6875rem with a matched line-height) as the one
sanctioned step below `text-xs`.
- Mint `TagChip` and adopt it on the Fitbit, Google Health, and Nightscout
cards. It stays distinct from `Badge`, which carries status meaning.
- Sweep the arbitrary micro sizes: the stepper label and the two dose-ledger
outline badges move onto the token; the muted target caption and the muted
ledger meta row move up to the `text-xs` muted floor.
No visible change beyond the two muted rows gaining a fraction of a pixel.
Arm the response waiter before navigating, so a response that lands during
the initial load is still observed instead of timing out on an event that
already happened, and poll for the returning refetch rather than sleeping a
fixed span that a loaded machine can outrun.
Mood has been a first-class module here for a long time, with entries,
structured tags, rated factors and notes. The bridge to the external moodLog
service had nothing left to add, and its Settings card was withdrawn in
a56e6fe61 on the promise of a dedicated removal. This delivers it.
Removed: the hourly `moodlog-sync` queue, cron and handler binding; the
inbound webhook and its shared-secret handling; the reverse push and its four
call sites; the pull-sync module; the per-user credential routes and the
instance-wide toggle; the entry on the `/api/integrations/status` envelope,
the `IntegrationKey` union, the cadence map and the display-name table; the
boot-time secret rotation pass; 22 message keys per locale.
Migration 0271 drops the five `users` credential columns and
`app_settings.mood_log_global`, clears the ledger row for the provider, and
deletes the retired pg-boss schedule so no cron keeps enqueuing work no
handler drains.
Mood data is untouched. `mood_entries` is not named anywhere in the migration
and cannot be reached from it: the dropped columns carry no index, constraint
or foreign key, and `mood_entries.user_id` references `users(id)`, not any of
them. Rows the bridge imported keep `source = 'MOODLOG'`, and every read path
- list filter, source badge, exports, backups - still resolves that value.
`src/lib/validations/moodlog.ts` held the native mood-entry schemas alongside
the bridge's own; it is now `validations/mood.ts` and carries only the former.
The load-bearing one is the panel-coverage test: render the panel with an
envelope carrying every integration key and require each configured one to
surface as a card or as a fallback row. Drop the fallback row and it goes red,
which is the whole point — the previous shape of this bug was a provider on
the wire that no screen rendered, and no card-shaped test could have caught it.
Alongside it: the ladder table with the month-silent fixture that resolves to
stalled, the 24-hour and 7-day boundaries asserted against literals rather than
the constants they check, the per-metric stale flag firing only under a healthy
provider, and a structural guard that the verdict-to-pill mapping is defined in
exactly one module.
The card suites migrate with the semantics: a transient failure now expects the
warning pill everywhere, and the Apple Health suite trades its bespoke badge
states for pill assertions. The e2e mocks gain the verdict shape, the
nightscout entry, and an assertion that the card-less row is on the page.
Three `pillStateFor` implementations disagreed with each other, so the same
ledger state painted red on one card and amber on the next, on one page. All
three are gone; the client projects the server verdict once.
Red now means "your action fixes this" and nothing else. A transient upstream
failure carries the warning tone: telling a user to reconnect against a 503
sends them clicking at something they cannot repair, and the detail belongs in
the inline error line anyway. Three new pill states carry the rest — no recent
data, sync stopped, waiting for first data.
Per-metric freshness has been computed on every status call since v1.27.30 and
rendered nowhere. Every connected card now opens a disclosure listing each data
type the connection has delivered and how long ago, with a quiet one flagged.
Collapsed by default so a 25-type card keeps its shape, but the collapsed
summary already names the count, or the signal hides behind a click. A type a
provider never delivered simply is not listed.
The panel iterates the envelope and renders a plain status row for every
configured entry no card claims. That is the structural half: a connection can
no longer be running, failing and absent from the page at once.
Apple Health drops its bespoke badge for the shared pill, gains the divider and
body inset every sibling carries, and says something when a week has passed
with nothing arriving. Nightscout reads the envelope instead of its own status
round-trip. The OAuth card uses the shared error primitive, all nine cards
carry the divider testid, and the four original connectors gain the "view your
data" link the newer ones already had.
The ledger records what the last attempt did. It has no way to say what is
no longer being attempted: a row frozen at `error_transient` for a month
reads exactly like one retrying every hour, because nothing anywhere read
the age of `lastAttemptAt`.
`sync-verdict.ts` derives the missing reading as a pure read-side
projection: eight verdicts down one ladder, no writer, no cron, nothing that
can desynchronise from the row it reads. `stalled` is the new one, and it
deliberately outranks `failing` — an integration nobody is calling is not
failing, it is not running.
Every entry on `/api/integrations/status` carries the verdict, computed
inline from data the route already holds. That placement is the point: a
card-level verdict misses a card-less provider by construction, which is how
a dead sync stayed invisible. Nightscout joins the envelope so its card can
stop fetching its own status.
The freshness module gains the workout leg (Strava writes no measurements at
all) and a source-parameterised core so the Apple Health route can reuse it.
Its per-metric `stale` flag fires only while the provider itself reads
healthy: that combination is the dead-pipe signature, and when the whole
connection has stopped every metric ages together anyway.
MCP reports the verdict beside `connected`, which only ever meant "not
explicitly disconnected".
Sweep every feet + inches pair the fields can offer and every whole-inch
height across the canonical range, asserting the value comes back
unchanged and lands inside the server's window. Assert the metric branch
with toBe so a re-derivation of a stored height cannot slip through.
Render both entry surfaces under each preference: the metric case keeps
the single centimetres box with the canonical guardrails, the imperial
case shows the feet + inches pair seeded from the stored value. Extend
the structural guard so a surface that drops the adapter, hardcodes a
centimetre guardrail, or hardcodes a unit label trips a tripwire.
Height is a profile column, not a MeasurementType, so the display
transform that carries the metric/imperial preference across every
reading surface never reached it. Add the adapter that closes the gap.
With imperial selected both entry surfaces render a feet + inches pair
instead of a centimetres box; with metric selected the field is what it
was. The adapter converts to canonical centimetres at the entry
boundary, so storage, the wire, the Zod bound, and every consumer of
the value stay unchanged.
Imperial entry quantises to whole inches, which map to centimetres
without a remainder, so save-then-reopen returns the typed pair. The
offered feet window rounds inward against the canonical 50-300 window
so a height the fields allow is never refused on save.
The unit select shares the Settings card with the height field, so a
flip re-expresses the in-flight draft through the new branch rather
than stranding an empty field.
Stable per-segment sleep keys plus the replace-by-window sweep, a one-shot
repair over the past year, Retry-After handling, and the unchanged-value write
skip. Migration 0270 records which connections the repair has been through.
Mirrors the Google sleep suites name for name: the mapper keeps its externalIds
across a re-score that re-classifies and renumbers segments, the sweep stays
bounded to the night's window and never touches the fresh keep-set, a null
window issues no delete at all, and a cleanup failure never fails the sync.
The end-to-end fixture runs one night stored under the old keys through
`syncUserSleep` and pins the ordering the heal depends on — sweep first, then
the rescue re-keying the tombstoned rows in place, no parallel insert — plus a
second pass that writes nothing at all.
Also covers the repair's verdict gates (bounded 365-day window, marker stamped
only on a clean run, watermark untouched, dead token and reauth park returning
without a stamp), the unchanged-value skip including the re-classified segment
it must not swallow, and both Retry-After paths.
Fitbit re-scores a night after the fact, and the per-segment externalId carried
a positional index plus the stage label. Both moved on a re-score: renumbered
segments minted fresh keys, the previous scoring's rows stayed live because
nothing swept them, and the night total counted both copies from then on.
Key the segment on the stable session anchor plus its own start instant
(`<logId>:sleep:<segment-start>`), and add the replace-by-window sweep every
other segment-writing provider already has. The two ship together with the
natural-key rescue that has been sitting in the Fitbit upsert unused: the sweep
tombstones the old-keyed rows first, so the rescue re-keys those very rows in
place instead of inserting a parallel copy or losing the insert to
`skipDuplicates` against the natural unique index.
A one-shot repair queue re-reads the bounded sleep history once per connection
so no user has to do anything; it stamps `sleepRepairedAt` (migration 0270) only
on a clean run, never touches the sync watermark, and reports the rows it
removed. Nights older than the 365-day backfill horizon keep their old keys and
whatever duplicates they already hold — they can no longer gain new ones.
Alongside: `fitbitGet` now honours a `Retry-After` inside a 120 s cap by waiting
once and retrying once, and fails fast above it so a long hold cannot starve the
rest of the poll cohort or outlive a job's expiration. The measurement upsert
skips a write whose payload is unchanged, which takes the hourly overlap off the
delta feed for every Fitbit resource.
A route with no caller is an API detail, not a feature. The Oura, Polar,
Strava and Nightscout cards get the same action WHOOP already had, in the
same row as Test connection, rendered only once connected: post the sync,
show the count or the failure, invalidate the reads that depend on
measurements. No full-history dialog, since these providers have no such
arm. Keys added across the six locales.
These four were the only connected providers with no way to ask for a
sync; they ran on their scheduled pass and nothing else. Each gets a POST
sync route on the hardened Fitbit and Google Health template: session auth,
a 5-per-minute per-user bucket, and a fixed 502 on failure. No body and no
full-sync flag, because none of the four entry points has a full-history
arm to call. Polar goes through the shared legs entry point so both legs
run with the attribution rules built for them.
The Nightscout error arm is the one that matters: a base URL carries the
API token as a query parameter, so the caught message can hold the user's
secret and never reaches the response body. The classified failure is
already on the ledger, recorded with the provider's own redaction.
Connecting also starts the first sync now. The poll handler has accepted a
single-user payload since it was written and never had a producer, so a
fresh connection sat empty for up to an hour waiting for the schedule. The
Oura and Polar callbacks and the Nightscout connect route enqueue one
targeted job each, best effort, with the hourly tick still the safety net.
Strava needs none: its callback already enqueues the history backfill,
which covers the recent window.
The four poll-queue names move into their own module so a request-path
caller can name a queue without dragging the whole worker handler graph
into the request bundle, following the backfill-queue precedent. Creation,
scheduling and handler binding stay in the registrar, and the dead-queue
guard follows the declarations.
The lookback was pinned at seven days, so a sync that stayed broken for
longer than a week came back with a window too narrow to reach the gap.
The quieter case did the same damage with every signal green: a ring left
unsynced holds its nights in Oura's cloud until the app is opened, every
hourly tick succeeds with empty arrays, and when the days finally arrive
they sit outside the window.
Anchor the window on the newest live Oura measurement instead, clamped
between the existing seven-day floor and a new thirty-day ceiling, plus a
day of overlap. Both failure modes leave the same fingerprint, so one
anchor closes both, and the watermark cannot drift out of step with the
data because it is the data. Tombstones are excluded: the sleep sweep
soft-deletes rows a revised hypnogram orphaned, and one of those must not
pass for a live reading.
The ceiling is thirty rather than the ninety days Oura's guidance would
allow, because the whole batch still rides one transaction. With data
flowing normally the clamp floors at seven and the tick is unchanged.
A connection with no rows at all takes the full month.
Cover the adapter end to end: an imperial seed, a guardrail projected
into the display unit, a save inverted back to canonical, and a reopen
that shows the number the user typed, swept across the whole editable
window at the input's own step. Temperature carries the affine case,
where a difference must take the factor without the offset.
Assert the metric path is the exact identity rather than merely close,
so a stored value cannot drift by a rounding pass.
Extend the structural guard to sweep the three target and threshold
surfaces, and add two tripwires: each must call the preference hook and
convert through the shared adapter. Reintroducing a hardcoded unit or
swapping the hook for a literal now fails the guard.
Target ranges stayed canonical while every reading surface moved to the
metric/imperial preference in the previous release, so an imperial
account saw a weight chart in pounds above a target reference in
kilograms. The panel is a coupled display and edit unit: converting only
its display would have corrupted the edit seed and the save round-trip,
which is why it was held back.
Add one adapter that owns every direction of the conversion and route
all three surfaces through it. The reference panel converts the
canonical payload once and hands the converted pair to the range bar,
the status pill, and the editor seed. The editor seeds from the stored
value converted to the display unit, validates against guardrails
projected into that same unit, and inverts the typed number back to
canonical before the PUT.
Guardrails round inward, so the 30 kg floor projects to 66.2 lb rather
than 66.1 lb, which would have inverted below the floor the server
enforces. Absolute values carry the affine offset, differences take the
factor alone. Input step comes from the transform's own precision.
Storage is untouched: thresholds stay canonical SI, and for a metric
account the adapter is the exact identity in both directions, so a
stored value is unchanged bit for bit.
Surface a self-hoster's report that the unit preference was stored but read by
almost no display. Weight, body composition, waist, and temperature now follow
metric or imperial at entry and everywhere they render, storage stays canonical
SI, and the MCP logging tool converts a known unit hint or refuses an unknown
one. OpenAPI diff is version-only; the wire stays canonical.
The crosstab, vitals, and cycle-summary renders are static server renders with
no QueryClient; the new preferred-unit hook reads through the auth query, so
mock it to a real metric-preference implementation (identity values, canonical
symbols) that matches the render those suites assert. Register the new unit
resolver on the MCP write-tools module mock so the preview path resolves.
Add affine-correctness tests for the transform registry (°C→°F absolute vs a
delta that must stay offset-free, lb/in factors, inverse round-trips), a
resolver test for the inbound unit aliases, a preferred-unit entry-form label
test, and MCP cases for converting a lb hint to canonical kg and refusing an
unknown unit. Add the structural guard that trips if any dashboard or insight
surface reintroduces a hardcoded transformed-type unit or value scale. Ship the
diagnose/convert script pair for legacy non-canonical measurement rows.
Route the weight and temperature displays in the mood-factor and cycle-phase
crosstabs and the GLP-1 plateau note through the unit transform: absolute phase
averages take the affine conversion, deltas stay factor-only, and the unit
symbol follows the preference. Thread a unit token into the plateau evidence
copy across the six locales so the sentence reads in the user's unit.
Wire the display transform into the chart scaffold, the chart itself (with an
affine offset for the temperature conversion), the dashboard trend tiles and
weight chart, the vitals grid, the coach read strip, and the device-score
tile. Each surface resolves its unit and scale from the user's preference at a
single choke point and stops hardcoding the canonical unit, so an imperial user
sees a consistent value, axis, band, tooltip, and range hint while a metric
user's render stays byte-identical. Retire the local celsius display shim now
that the transform owns the symbol.
Add the affine display-transform registry (kg↔lb, cm↔in, °C↔°F with the
temperature offset carried as an absolute-only shift), a single client hook
that reads the preference, and a shared inbound unit-alias resolver. Wire the
manual entry form to label, prefill, and convert at the boundary so an imperial
reading persists in canonical SI, and route the record list value cells and
edit dialog through the same choke point. Close the one write path that could
persist a non-canonical unit: the MCP log_measurement tool now resolves a unit
hint to canonical or refuses it, reusing the resolver the CSV importer already
relied on.
A 31st new mirror create at the cap returns 422 with the limit_exceeded
errorCode; an idempotent re-post of an existing mirror at the cap still returns
200; a native create at the cap is unaffected and never runs the count. The
list read exposes externalSource as APPLE_HEALTH for a mirror and null for a
native row.
A client that mints a fresh externalId for the same source concept on every
sync sweep never matches the (userId, externalSource, externalId) idempotency
triple, so each sweep would otherwise create a new mirror row without bound.
Add a growth guard on POST /api/medications: once an account already holds 30
medications mirrored from an external source, a genuinely new mirror create is
refused with 422 and the errorCode medications.mirror.limit_exceeded. The guard
sits after the idempotency lookup, so an idempotent re-post of a medication the
account already mirrors still returns 200, and native creates never run the
count.
Echo externalSource on the medications list read so the web UI and an operator
can tell a mirrored row from a native one, and document both in the OpenAPI
contract.
The diagnose script reports the provenance, external-id values, and intake/schedule
counts of medications by name. The cleanup script deletes only name-matched
Apple-Health mirror rows with zero intakes and zero schedules, dry-run by default,
replicating the delete route (category cleanup, token revoke, audit, cache bust).
2026-07-24 23:02:03 +02:00
789 changed files with 59552 additions and 15673 deletions
# Opt-in for a plain-HTTP IP_GEO_LOOKUP_URL provider (e.g. free ip-api.com); off by default — looked-up IPs then travel unencrypted over your server's egress.
# IP_GEO_ALLOW_INSECURE="true"
#
# Directory the offline GeoLite2 databases are read from; default /opt/geolite2 (the path the image bakes its own copy into). Point it at a directory you mount yourself to bring your own MMDBs — see docs/self-hosting/geolite2.md.
@@ -89,6 +89,7 @@ The architecture map in `.planning/codebase/arch.md` walks each layer with file:
- **Every API route wraps in `apiHandler`, with three documented exceptions.** The MCP OAuth routes (`mcp/oauth/{authorize,token,register}`) use `withBackgroundEvent` instead, because OAuth requires RFC-format error bodies that the standard envelope cannot express. They carry the same protections by hand — rate limit, body cap, kill switch, mandatory PKCE-S256, redirect-URI allowlist. Every other route wraps. Every body-accepting route runs Zod `safeParse` and returns 422 via `returnAllZodIssues` (multi-issue envelope sanitised against echoed input through `sanitiseZodIssues`).
- **`userId` is always narrowed from session or Bearer.** No route accepts `userId` as a body field — it comes from `requireAuth()` and feeds the Prisma `where`. The batch endpoints (`/api/measurements/batch`, `/api/mood-entries/bulk`, `/api/medications/intake/bulk`, `/api/workouts/batch`) don't even declare a `userId` field in their Zod schemas.
- **No mass assignment.** Every `prisma.X.{create,update}({ data: ... })` builds its `data` object field-by-field from `parsed.data`, never by spreading the parsed object whole. `tokens.create` builds `permissions` from a hardcoded literal, never from request input.
- **A two-ended change carries both ends.** Adding a column, a payload field, or a user preference without its consumer is the failure mode this repo keeps rediscovering: the column ships with the schema change, the reader is "the follow-up", and nothing in the gate notices because every other check proves one end. So the consumer lands in the same release branch, or the schema comment says why it cannot: `/// @internal: <reason>` for something deliberately never surfaced, `/// @pending-consumer(#issue)` for a consumer that is genuinely still coming. `pnpm dlx tsx scripts/audit-column-readers.ts` sweeps for unannotated write-only columns and re-lists every `@pending-consumer` marker so a follow-up that never happened surfaces at the next release audit. Run it in the deep-audit step; it is a review tool with a grep-shaped matcher, deliberately not a gate. The two questions that can be answered exactly are gates instead — `account-payload-consumer-guard.test.ts` (every `/api/auth/me` field has a client reader) and `measurement-backup-completeness.test.ts` (every `Measurement` column reaches the backup).
- **Bearer scope is fail-closed.** `requireAuth()` with no argument admits a cookie session or a wildcard (`["*"]`) token only — a narrow-scope token is refused with 403 and an `undeclared_scope` audit row. A route that means to accept a narrow token names the scope: `requireAuth(FHIR_READ_SCOPE)`. Adding a route therefore cannot silently widen an existing token's reach, because the default arm denies. Only the login / passkey / refresh paths mint `["*"]`; every user-facing mint is narrow, and narrow now means narrow. Two surfaces resolve a Bearer token outside `requireAuth` — `/api/ingest/medication` and `/mcp` — and that set is frozen by a structural test (`src/__tests__/bearer-scope-enforcement-guard.test.ts`).
- **`requireAdmin()` is cookie-only.** Bearer tokens — even with `["*"]` scope — cannot reach admin endpoints. This is a structural boundary in `requireAdmin()` (`src/lib/api-handler.ts`), not a runtime check that future code can soften.
- **Raw SQL is parameter-bound or whitelist-spliced.** Every `$queryRaw` uses tagged-template parameters. Every `$queryRawUnsafe` / `$executeRawUnsafe` either passes positional `$N` placeholders with an argument array OR splices a value already asserted against a closed enum + regex (see the whitelist-splice block in `src/lib/rollups/measurement-rollups.ts`, around the `$queryRawUnsafe` calls). Inline comments document the whitelist at the splice point.
@@ -127,7 +128,7 @@ The architecture map in `.planning/codebase/arch.md` walks each layer with file:
| OpenAPI | `src/lib/openapi/registry.ts` + `src/lib/openapi/routes/` (23 modules, `index.ts` barrel) | Source of truth for `docs/api/openapi.yaml`. |
| Schema | `prisma/schema.prisma` (80 models) | `cuid()` PKs, `snake_case` columns via `@map`, encrypted columns mostly under `*Encrypted` (search the file). |
| Schema | `prisma/schema.prisma` (115 models) | `cuid()` PKs, `snake_case` columns via `@map`, encrypted columns mostly under `*Encrypted` (search the file). |
| Compose | `docker-compose.yml` | `app` + `db`. Env-var whitelist under `environment:` — vars not listed never reach the container. `pull_policy: always` is load-bearing. |
`.planning/codebase/arch.md` carries the full annotated walk for every section.
@@ -140,7 +141,7 @@ The v1.5.2 audit produced `.planning/security-audit-v1.5.2.md` and a stack of pe
- **SSRF: input-time `isPublicUrl` is the floor.** The helper `isPublicUrl()` in `src/lib/validations/notifications.ts` catches every IPv4 / IPv6 alt-notation class (octal / hex / decimal IPv4, IPv4-mapped IPv6, IPv6 ULA, CGNAT, link-local, loopback, metadata). Use it for every outbound URL that comes from a user / admin input. DNS rebinding and the redirect-follow gap remain as architectural follow-ups (issues #217 + #218). Until those land, every NEW outbound `fetch()` that touches a user-controlled host must pin `redirect: "manual"` and an `AbortSignal.timeout`.
- **Outbound egress goes through `safeFetch`.** `src/lib/safe-fetch.ts` is the one documented egress entry (`redirect: "manual"` + `AbortSignal.timeout(15_000)` defaults; opt into the connect-time DNS-rebinding pin with `requirePublicHost: true` for any operator- or user-supplied host). The in-repo ESLint rule `healthlog/safe-fetch-required` (set to `error`) bans raw `fetch(` under `src/lib/` + `src/app/` outside the wrapper internals and test files; same-origin relative-path (`/api/…`) client fetches are exempt by construction.
- **Rate limits live in Postgres.** `src/lib/rate-limit.ts` uses a single atomic SQL upsert returning `{count, reset_at}`. Multi-instance correctness is structural. Bucket-key convention: `<surface>:${identifier}` where identifier is `userId` for authenticated routes and the trusted-proxy IP for anonymous. Anonymous auth surfaces use `checkAuthSurfaceRateLimit(...)` so a trust-violation collapses every anonymous caller into a single tight bucket rather than a free-for-all under the unknown-IP bucket.
- **Webhooks: shared-secret + `timingSafeEqual` + per-source rate limit BEFORE secret verification.** Withings, Telegram, moodLog, the Coolify deploy webhook, and the CSP report endpoint all follow this exact pattern. The Withings path-segment secret is scrubbed from `http.path` / `http.route` by `redactSecrets()` via the `PATH_SECRET_PATHS` registry in `src/lib/logging/redact.ts:40`.
- **Webhooks: shared-secret + `timingSafeEqual` + per-source rate limit BEFORE secret verification.** Withings, Telegram, the Coolify deploy webhook, and the CSP report endpoint all follow this exact pattern. The Withings path-segment secret is scrubbed from `http.path` / `http.route` by `redactSecrets()` via the `PATH_SECRET_PATHS` registry in `src/lib/logging/redact.ts:40`.
- **Idempotency keys are user-scoped, length-bounded, and refuse to cache secret-shaped responses.** `src/lib/idempotency.ts`. A client cannot replay another user's idempotency key (composite unique index by `userId_key_method_path`). The cache helper refuses to persist a response body containing `hlk_` / `hlr_` / `sk-` patterns even if a future caller wraps an auth endpoint by mistake.
- **CSP: strict, per-request nonce, surgical `connect-src`.** Production CSP gates third-party hosts to the routes that need them — AI hosts only on `/settings/ai/*`, `wbsapi.withings.net` only on `/settings/integrations/withings/*` + `/api/withings/*`. Exactly one `dangerouslySetInnerHTML` in the tree (the theme bootstrap in `src/app/layout.tsx`, nonce-bound, file-literal content). No markdown library installed anywhere; Coach / briefing / insights render as plain React text children. Don't add one without a security review of the renderer's HTML-allow defaults.
- **No CORS headers anywhere.** Same-origin-only by construction. Adding `Access-Control-Allow-Origin: *` anywhere would silently open every authenticated endpoint to cross-origin POST; webhook routes accept cross-origin POSTs but they authenticate by header secret, not cookie.
@@ -153,7 +154,7 @@ These keep tripping operators; they're worth knowing before you push something t
- **`SESSION_COOKIE_SECURE`** controls the `Secure` flag on every cookie the app issues. Unset → flag tracks `NODE_ENV === "production"`. Set to `false` for LAN / Tailscale / VPN-only HTTP self-hosts where the operator deliberately serves plain HTTP. Set to `true` to force the flag even in dev. The compose `environment:` block must list it explicitly — vars not on the whitelist don't reach the container even when `.env` has them. v1.5.2 closed the missing-whitelist regression.
- **`pull_policy: always`** in `docker-compose.yml` is load-bearing. Without it Docker keeps a stale `:latest` digest cached and silently skips the registry round-trip on `compose up`.
- **`ENCRYPTION_KEYS` map vs legacy `ENCRYPTION_KEY`.** The map (`{"v1":"<hex>","v2":"<hex>"}` + `ENCRYPTION_ACTIVE_KEY_ID=v2`) is the modern path. The legacy single-key env var stays accepted as `v1`. Rotation playbook lives at `docs/ops/encryption-key-rotation.md`; do NOT drop a key from the map before the rotation script reports zero remaining rows on that key.
- **GeoLite2 databases.** Operators run `scripts/fetch-geolite2.sh` with a MaxMind licence key before `docker build`; the image bakes the MMDBs into `/opt/geolite2/`. Without them the resolver falls back to online `ipwho.is` and the admin login overview surfaces "unknown" for offline lookups.
- **GeoLite2 databases.** Two ways in. Building your own image: run `scripts/fetch-geolite2.sh` with a MaxMind licence key before `docker build` and the MMDBs bake into `/opt/geolite2/`. Running the published image: mount a directory of `.mmdb` files and point `GEOLITE2_DIR` at it — it is on the compose `environment:` whitelist and documented in `docs/self-hosting/geolite2.md`. Without either, the resolver falls back to the online provider and every login IP leaves the host.
- **APNs `.p8` key.** v1.4.47.x established `APNS_KEY_B64` as the env-var contract — pasting the PEM body verbatim through Coolify's `env_file` mangled the literal newlines. The key must be scoped "Sandbox & Production" in the Apple Developer Portal; a Sandbox-only key fails with `BadEnvironmentKeyInToken` on production builds.
@@ -4,7 +4,7 @@ This file provides guidance to Claude Code (claude.ai/code) when working with co
## Project
HealthLog — a personal health-tracking PWA (weight, blood pressure, pulse, mood, medication compliance) with Withings integration, moodLog.app sync, Dracula-themed UI, mobile-first design, offline caching, and doctor report PDF export.
HealthLog — a personal health-tracking PWA (weight, blood pressure, pulse, mood, medication compliance) with Withings integration, Dracula-themed UI, mobile-first design, offline caching, and doctor report PDF export.
"$comment":"Client-bundle budgets, enforced by scripts/check-bundle-budget.mjs (--check) after `next build` in CI. Values are KB gzip and include the shared rootMainFiles baseline. Measured at v1.32.0 after the correctness/UX architecture wave: / 425, /insights 411, /measurements 412, /insights/mood 428, total 2982, baseline 129. Route caps retain focused headroom; the aggregate cap allows normal chunk noise while still catching a new ~90 KB duplicated library. Message catalogs and duplicate Recharts chunks have dedicated structural guards.",
"$comment":"Client-bundle budgets, enforced by scripts/check-bundle-budget.mjs (--check) after `next build` in CI. Values are KB gzip and include the shared rootMainFiles baseline. Re-measured at v1.33.0: / 429, /insights 414, /measurements 416, /insights/mood 432, total 3060, baseline 130. The aggregate rose 78 KB from v1.32.0's 2982 because that release adds surfaces rather than libraries: a dose-history import card, inventory date editing, fourteen confirmation dialogs, and a job-failure panel. Every per-route cap still passes with headroom, and the thing this aggregate exists to catch (a newly duplicated ~90 KB library) did not happen: the Recharts chunk count is still 1 and structurally guarded. Raised 3050 to 3120 for that reason, not to make a red check green. Route caps retain focused headroom. Message catalogs and duplicate Recharts chunks have dedicated structural guards.",
<titleid="title">HealthLog data flow — device to insight</title>
<descid="desc">Five-stage pipeline: sources (Withings, Apple Health export, iPhone HealthKit, manual entry, moodLog.app) feed ingest endpoints, which write to Postgres Measurement and MeasurementRollup tables, then surface on Dashboard tiles, Insights cards, the AI Coach, and the Doctor PDF.</desc>
<descid="desc">Five-stage pipeline: sources (Withings, Apple Health export, iPhone HealthKit, manual entry, Nightscout) feed ingest endpoints, which write to Postgres Measurement and MeasurementRollup tables, then surface on Dashboard tiles, Insights cards, the AI Coach, and the Doctor PDF.</desc>
| `04-source-priority.svg` | Three sources for the same metric on the same day → resolver picks one canonical row per (cumulative vs point) ladder. Losing rows stay in the audit trail. |
| `OPENAI` | <https://platform.openai.com/api-keys> | `gpt-4o` | `https://api.openai.com/v1` | Measurement context sent to OpenAI |
| `ANTHROPIC` | <https://console.anthropic.com/settings/keys> | `claude-sonnet-4-6` | Anthropic SDK default | Measurement context sent to Anthropic |
| `LOCAL` | None (your endpoint) | `local-model` | OpenAI-compatible URL you control | Stays on your network |
| `CHATGPT_OAUTH` | Sign in with your ChatGPT account | Codex-routed | `chatgpt.com/backend-api/codex/responses` | Routed via your ChatGPT subscription |
| `OPENAI`| <https://platform.openai.com/api-keys> | `gpt-4o` | `https://api.openai.com/v1` | Measurement context sent to OpenAI |
| `ANTHROPIC`| <https://console.anthropic.com/settings/keys> | `claude-sonnet-4-6` | Anthropic SDK default | Measurement context sent to Anthropic |
| `LOCAL`| None (your endpoint) | `local-model` | OpenAI-compatible URL you control | Stays on your network |
| `OPENAI_COMPATIBLE` | Your gateway's key, or none | none (you name it) | OpenAI-compatible URL you configure | Reaches whatever your gateway routes to |
| `CHATGPT_OAUTH` | Sign in with your ChatGPT account | Codex-routed | `chatgpt.com/backend-api/codex/responses` | Routed via your ChatGPT subscription |
The four spellings above are the canonical `User.aiProvider` enum
The five spellings above are the canonical `User.aiProvider` enum
values. Anything else falls through to the admin-shared OpenAI key
(if configured) or the `NoProvider` stub that surfaces "No AI
provider configured" to the UI.
@@ -54,6 +55,11 @@ order. The default is encoded in
4.`local` — self-hosted Ollama / LM Studio / vLLM endpoint.
- **`utils/`** — fixtures such as `mock-dashboard-snapshot.ts`.
- **`*.spec.ts`** — one spec per flow: auth/login/redirect, dashboard, charts, the medication-wizard cadences (`medications-wizard-*`), insights generation + scroll restoration, doctor report, settings, mobile-viewport consistency, locale switch, accessibility (`a11y.spec.ts`), and the `v1427-*` regression set.
## Convention
## Conventions
Import `test` and `expect` from `./setup/test`, never from `@playwright/test` — types (`Page`, `Route`, …) still come from the package. The entry point extends Playwright's `test` with an automatic fixture that drops route handlers and page listeners after every test, so a handler left in flight cannot fail the test it belonged to once the context closes. `src/__tests__/e2e-route-cleanup-guard.test.ts` enforces the import boundary.
Assert against stable `data-*` attributes (`data-slot`, `data-display-step`, root display attrs), not viewport-dependent visible text. Responsive `sm:hidden` UI changes break `getByText` on desktop while the underlying element is still present — anchoring on data attributes keeps the specs stable across breakpoints. See [`../CLAUDE.md`](../CLAUDE.md).
`an intentionally 1500px-wide block did not widen main's scroll area — main overflow-x:${state.overflowX} overflow-y:${state.overflowY}, canary width ${state.canaryWidth}, inside main: ${state.canaryInMain}`,
Loaded 100 of 789 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Marc-André Bombeck
