Marc-André Bombeck e4880dcdc1 feat: the score says when a pillar stopped counting
A pillar can leave the set behind the number without anybody choosing it:
a window rolls past its floor, a module goes off, a source goes quiet. The
delta already refuses to narrate that as a health event, which stops a
false "you dropped six points" and puts nothing in its place. The level
moves, the panel shows a different number, and the cause is nowhere on the
surface. Under the adaptive minimum this matters more rather than less,
because compositions are smaller now and sit closer to their floors.

The report carries `compositionNotice` when today's set differs from the
last local day the account has a stored score for. Optional and nullable,
the additive shape the score's wire has used six times, so a payload
cached before it existed stays valid. It names what left and what joined
as pillar ids; the surfaces already own the labels, and the reason a
departed pillar stopped counting comes from that pillar's own row in the
same report rather than from a second vocabulary.

Two changes deliberately do not raise it. A method move and a recipe
change each already have their own note, and telling someone twice about
one event teaches them to ignore both.

The key is `health-score:v<version>:composition:<hash of the sorted set>`
and rides the existing dismissed-item ledger, so a dismissal holds until
the set moves again rather than until tomorrow. The read excludes today on
purpose: the row for today is written by the same request that computed
the report, so comparing against the newest row would find today's own
composition on the second load of the same page and the note would vanish
between two views of it.

This gives `HealthScoreRecord` its first production reader. Since it
shipped it has been written on every scored read and consumed by nothing
but backup and restore, which is the write-only shape the contributor
notes call a liability and which nothing in the gate can notice, because
every check proves one end. The round trip is proved against real
Postgres: raise the note, wipe the table, restore it through the admin
route, get the same note back, and hold the dismissal across it.

Rendering is one muted line on the score card and a card of its own on the
settings page, beside the recipe note rather than inside it. Deliberately
not a push.

Four fake Prisma clients gain the new read. They are doubles of a client
the reader really does call now; leaving them short and guarding the call
site instead would have been a shim for a caller that does not exist.
2026-08-30 16:16:57 +02:00
2026-05-16 14:19:57 +02:00
2026-05-15 22:59:10 +02:00
2026-03-10 20:14:33 +01:00
2026-03-10 20:14:33 +01:00
2026-03-10 20:14:33 +01:00
2026-03-10 20:14:33 +01:00
2026-03-10 20:14:33 +01:00

HealthLog logo

HealthLog

Self-hosted, privacy-first health tracking. Your vitals, your devices, your server.

License: PolyForm Noncommercial 1.0.0 Latest release CI status iOS app on TestFlight

Website · Live Demo · Documentation · iOS TestFlight

HealthLog dashboard: health metric tiles with 7-day trends, blood-pressure and weight charts, dark theme

Why HealthLog

HealthLog is a self-hosted health tracking app (PWA + native iOS client) that runs from a single docker compose up on a NAS, homelab, or small VPS. It brings weight, blood pressure, pulse, blood glucose, body composition, sleep, mood, menstrual cycle, and medications onto one timeline — synced from the devices you already own — and keeps everything encrypted at rest on hardware you control. No vendor cloud, no subscription, no telemetry.

HealthLog is a personal health record-keeping and wellness tool. It is not a medical device and does not diagnose, treat, cure, or prevent any disease — it helps you log, visualise, and export your own data, and leaves clinical judgement to a clinician.

Try the live demo to see a working install — sign in with demo / demo123demo123.

Highlights

  • Every vital on one timeline. Weight, blood pressure, pulse, glucose, body composition, sleep, SpO₂, respiratory rate, mood, and cycle tracking — charted with trends, moving averages, and clinical reference ranges (ESH 2023, ADA 2024), overridable with the targets your clinician set.
  • Clinical signals, opt-in and additive. Validated self-checks for mental wellbeing and sleep (WHO-5, PHQ-9, GAD-7, Sleep Condition Indicator — official questionnaire wording, calm crisis-resource handling), grip strength, a 0–10 pain score, waist and body measurements, and a longevity lab panel — each added through one signal registry, so a new signal wires into charts, correlations, the coach, the FHIR map, and the API at once.
  • Records, structured. Allergies and family history as encrypted structured records that flow into the doctor report, plus lab values you key in or scan from a printed report — OCR extracts the stated values, units, and dates for you to review and confirm before anything is saved. HealthLog transcribes what a report says; it never interprets or diagnoses from it. (Immunization records are deliberately out of scope.)
  • A document vault for the paper trail. An opt-in module stores every letter, report, and scan encrypted at rest — PDFs and photos preview inline, Office and text files stay download-only, and nothing user-uploaded can ever execute in the app. One searchable timeline with type, condition, and year filters, drag-and-drop and paste-to-upload, bulk filing, undo-able delete with a 30-day grace, and per-file/per-account limits the operator tunes.
  • Context that explains the numbers. An opt-in environmental module folds weather, daylight, and temperature in as influence signals (winter darkness against mood, heat against blood pressure) using a home location you set, so a pattern has somewhere to point.
  • Your devices, one server. Withings, WHOOP, Oura and Polar sync over OAuth2, Google Health connects Fitbit and Pixel Watch through your own Google Cloud client, Nightscout streams CGM glucose, an Apple Health export.zip folds your full history in, and the native iOS app streams HealthKit live. A per-metric source priority decides which reading is canonical when wearables overlap.
  • Medication tracking that tells the truth. Flexible schedules (weekly injections, weekday-only, intervals, PRN, cyclic), a configurable intake window per dose, and a traceable dose history where every slot reads taken, late, skipped, or missed — the same ledger the compliance rate is computed from, so the percentage can never disagree with the timeline.
  • AI insights you own. Daily briefing, health scores, correlations, and a conversational coach grounded in your own measurements and interpreted against cited guideline reference bands — where a value sits and what that means in plain words, never a diagnosis. The coach proposes concrete if-then plans you accept or decline, and suppresses proactive check-ins when there's nothing genuine to say. Bring your own OpenAI or Anthropic key, or point at a local endpoint (Ollama, LM Studio, vLLM) so nothing leaves your network.
  • Clinician-ready output. A doctor-report PDF generated client-side, a read-only HL7 FHIR R4 API, and scoped, time-limited share links you revoke after the visit.
  • Private by construction. AES-256-GCM encryption at rest with zero-downtime key rotation, passkey login, server-side sessions, strict CSP — and no third-party tracking anywhere.
  • Built to be lived in. Installable PWA with offline support, medication reminders over APNs, Telegram, ntfy, and Web Push, a sub-second dashboard on years of imported history — in English, German, Spanish, French, Italian, Polish, and Korean end to end.

The full feature tour, integration guides, and API reference live at docs.healthlog.dev.

Quick start (Docker Compose)

git clone https://github.com/MBombeck/HealthLog.git && cd HealthLog
cp .env.example .env

# Generate the three secrets (each a 64-char hex string = 32 bytes):
echo "POSTGRES_PASSWORD=$(openssl rand -hex 32)" >> .env
echo "ENCRYPTION_KEY=$(openssl rand -hex 32)" >> .env
echo "API_TOKEN_HMAC_KEY=$(openssl rand -hex 32)" >> .env

# LAN / plain-HTTP host (NAS, homelab, Tailscale) — required, or login fails:
echo "SESSION_COOKIE_SECURE=false" >> .env

docker compose up -d

Open http://localhost:3000 (or http://<host>:3000) — the first registered user becomes admin. The compose file pulls a pre-built multi-arch image (amd64 + arm64) from GHCR; no build step required.

Verify the running version:

curl -s http://localhost:3000/api/version   # returns version + buildSha + builtAt

SESSION_COOKIE_SECURE=false is the one setting plain-HTTP self-hosts must set: without it the session cookie carries the Secure flag, the browser drops it over HTTP, and login silently fails. Leave it unset (or true) only when a TLS reverse proxy serves HTTPS — and then set NEXT_PUBLIC_APP_URL and APP_URL to the public URL first (see the self-hosting guide).

Persistent state lives in exactly one named volume (pgdata, the Postgres data dir); the app container is stateless, so backing up the database backs up everything.

NAS and homelab users have ready-made paths: Unraid Community Applications and Portainer app templates.

Self-hosting

One container hosts both the web server and the job worker by default; split them via HEALTHLOG_PROCESS_TYPE=web|worker for horizontal scale. Encrypted daily backups to any S3-compatible bucket are opt-in via the admin panel, new users join by invite link or QR code, and the stack works out of the box behind Caddy, Traefik, Nginx, or Coolify.

HealthLog ships releases roughly weekly. Pin a tag, back up before upgrades, and skim the CHANGELOG before pulling latest. The operator manual — reverse proxy, migrations, encryption-key rotation, backup and restore — lives at docs.healthlog.dev.

Native iOS app

A SwiftUI companion in public beta via TestFlight, built on the same API as the web client: live HealthKit two-way sync, medication reminders with action buttons that work without opening the app, and an on-device coach on Apple-Intelligence-capable iPhones. Code lives in MBombeck/healthlog-iOS.

Tech stack

Next.js 16 (App Router, React Server Components), TypeScript strict, PostgreSQL 16 with Prisma, pg-boss for jobs, Tailwind CSS 4 + shadcn/ui, Recharts, WebAuthn passkeys, Vitest + Playwright, multi-stage Alpine Docker image. The OpenAPI 3.1 contract for native clients is generated from the Zod schemas at docs/api/openapi.yaml.

Documentation

User and operator docs docs.healthlog.dev
Release history CHANGELOG.md
API contract docs/api/openapi.yaml
Security policy SECURITY.md
Contributing CONTRIBUTING.md

Status

Actively developed — new releases roughly weekly, issue reports and PRs welcome. Behaviour and schema can change between versions; migrations are forward-only.

License

HealthLog is licensed under the PolyForm Noncommercial License 1.0.0: free to use, self-host, and modify for noncommercial purposes. Commercial use requires a separate agreement — open an issue or reach out via healthlog.dev. Releases up to and including v1.15.18 were published under AGPL-3.0 and remain available under that license.


healthlog.dev · Live Demo · Docs · iOS TestFlight · Buy Me a Coffee

Languages
TypeScript 98.8%
JavaScript 0.8%
Shell 0.1%
PLpgSQL 0.1%