The zone's table rows carry their height in w:trHeight, which the collapsed
paragraph had no way to hold: a 2.2cm header band read as one line and every
page's body started 8mm high. The height its lines do not fill now rides the
paragraph's space above, which the band measurement already takes — and a
header draws that space too, so the rule line the cell carries lands at the
foot of the band instead of under the first line. A footer's space above stays
a measurement: it holds the ODF zone's own gap to the body.
Measured on one template: 15 parity reports against LibreOffice down to 6.
Claude-Session: https://claude.ai/code/session_01Wzs2qG6Y5qm7mKmJHfu44G
A long document placed a zone box on every page, and the browser laid all of
them out again on every pagination pass. Only a window around the current page
carries its zones now; a capture or a printout opens it to the whole document
first, so the PDF export and Cmd+P are unchanged.
Measured on a 460-page file: settled 6.17 s → 5.27 s (interleaved A/B, median
of seven). Spacer, index and text-box geometry byte-identical on five files.
Cross-references resolve in one batch per pass, the index reads every leader gap
before filling one, and a zone's tabs lay out with the other zones' — and only
where a field asks for the page count or the chapter map.
List marker and list style decorations are rebuilt only for a transaction
reaching into a list; the unsaved dot compares documents structurally, and the
autosave serializes when it writes rather than per keystroke.
The columns flow applies every op it can judge in a pass, so a section pages in
one pass. Two long files that took 33 s and 20 s now settle in 9 s and 2 s.
Probed: restart the numbering at 2 on the third sheet of a mirrored document and
LibreOffice puts sheets 2 and 3 both at the outer margin with the left-page zone —
two left pages in a row. Restart at 5 and the parity stays with the sheets. Mirrored
margins, the page border and the odd/even zone now all read `printedPageNumber`.
On a fixture built for it the sheets went 15.0/30.1 → 30.1/15.0mm, LibreOffice's
30.0/15.0. One fixture rises 26 → 62 reports, all downstream of a page-count defect
there: its heads now agree with the numbers we print instead of another layout's sheets.
The edge→zone distance was document-wide, so an index whose header starts 4cm
down had its body open 14.5mm too high and the page under it followed. HfSet
carries the section's own pair (and its first page's, where the page style hands
over): ODF's page-layout margin is that distance, Word's is w:pgMar
w:header/w:footer, and both exports write it back.
The zone box took the document's margins for its left edge, its width and
its height, so a section with page margins of its own — a mirrored body
after a wider front matter — drew its running head 9mm off the text it
belongs over, and the band was measured at the wrong width.
A roman front matter before a decimal body is one page style before another
in ODF and one w:pgNumType per section in Word, not a document setting — read
as one, its pages printed 1, 3 where the reference prints i, iii. HfSet grows
pageNumberFormat, both exports write it back, and the DOCX importer takes the
document's own format from the first section, as it already does the paper.
The body's margin has to clear the band the zone renders at, and the
estimate counted paragraphs — blind to a line that wraps, to a run smaller
than the 12pt floor, and to the zone's padding. HeaderFooterLayer now lays
each section's zones out off-screen at their text width and reports the
height; the ODF zone's own gap to the body and its padding ride the
collapsed paragraph's spacing, which is where the export already puts them.
Measured on one file: a three-line band read as two, 14.9mm a page.
utils/chapterField owns the per-zone reading (header = the chapter at
the page top, footer = the last begun) so the probed LibreOffice
semantics is unit-tested; the DOM measurement feeding atTop stays in
Editor.svelte.
The header shows the chapter in force at the page's top (a heading
counts once it opens a page), the footer the last one begun on the
page. Both zones showed the footer's reading before.
Clearing hfActive removes the live zone's DOM during Svelte's flush;
ProseMirror dispatches a blur transaction as it goes, and the hfTick
mutation in onTransaction then landed mid-render and threw, aborting the
rest of the batch. The tick is queued to the next microtask instead.
View ▸ Split (Ctrl+Alt+S): a second live view of the editor's state, stacked
below the first and editable the same way. The panes share a width, so the
second renders the pagination the first measures — pageBreaks, columnsFlow
and tabStops skip the pass on a split pane rather than run it twice.
Every widget decoration now builds its DOM in a function: two views render
one decoration set, and a shared node is taken back and forth between the
two documents until the tab locks up (measured on a two-page document).
A section narrower than the reserved sheet now splits the difference
between its insets instead of hanging it all on the right, and every
per-page layer draws from the box's own left — sheet, header/footer, page
border and line numbers. The ribbon's Size menu gains the same per-section
block Orientation already had.
Word's Start at, per section: ODF writes style:page-number on the
paragraph that switches master page, DOCX a w:pgNumType w:start. That
section is no longer exported as a continuous break — probed, LibreOffice
drops the start off a continuous one, and neither word processor honours
it there. The footer counts from the nearest restart at or above the page.
The page grid was one repeating cycle, so every page had to be the same
size. It is now a table of height runs the placement pass grows as each
section's first page becomes known, and the sheets are one box per page
instead of a repeating gradient — .paper reserves the widest section's
paper, a narrower one takes the difference as a right inset.
Layout ▸ Orientation offers "this section"; the size stays document-wide
in the ribbon but round-trips per section from a file.
Layout > Page numbers: 1 / i / I / a / A and a first-page number, both
round-tripping. ODF has no document-level start — probed, LibreOffice
puts style:page-number on the first paragraph's own style — so the
export mints one there and the page layout carries style:num-format;
Word takes both in the first section's w:pgNumType. The page *count*
field stays decimal, as the one both of them write does.
ODF style:page-usage="mirrored" and Word's w:mirrorMargins make the
declared left/right the inner/outer pair, which an even page swaps.
Read, rendered and written back in both formats; the body rides the
per-block inset a section's own margins already use, the header and
footer band moves with it. Measured on a mirrored two-column file:
its page 2 went from 12.7-184.1mm to 31.8-203.2, which is LibreOffice's
to 0.1mm, and its running head with it.
A sweep of the whole tree: 27 blocks ran to four lines or more. Trimmed
to what the code can't say, with two of them split back onto the
function each was really about.
The zone was pinned to Liberation Serif 12pt, so a run whose font the
file leaves to the default — every page-number field in a fixture
fixture — rendered serif inside an Arial footer. Both formats base the
Header/Footer style on the default paragraph style, so the zone now
takes its text half.
Both round-tripped through save/load already but had no way in: the
header/footer bar gains a Chapter button next to page number/count, and the
table toolbar three buttons for the cell's vertical alignment.
A manual's footer carries text:chapter, which we imported as the string the
producer happened to cache — so every page of a fixture claimed the last chapter
of the book. It is now a live field: the layer resolves the last heading at
or above its outline level to have started by that page. Round-trips to ODF
text:chapter and Word STYLEREF; PDF keeps the cached name (Chrome's print
engine has no named strings).
A positioned frame in a header is out of flow — the title-page background or
watermark. It keeps its wrap and its offset from the page corner, and the
layer paints it per page under the body instead of flowing it inline, where
it reserved a page-tall line of body space.
The page surface moves from .tiptap to .paper so the image has a layer
between the sheet and the text; ODF export writes it back page-anchored.
The zones already imported, rendered and exported per section, but only
section 1 was editable state — the rest were marked read-only.
Editing now targets the section of the page it starts on: a double-click
edits the zone under the pointer, the Layout-panel buttons the current
page's. zoneKey/writeZone route the single live editor's read and its
write-back to either the six per-zone props or the extraHfSections entry.
The left⇥centre⇥right layout every letterhead uses rides on them, and a
zone had none: Word keeps them on the Header style, ODF on the zone
paragraph's, and neither was read or written.
An inactive zone is static generateHTML output no plugin reaches, so it
is measured straight on the DOM. Two bugs surfaced doing it: a segment
its own advance had pushed onto the next line measured as wrapped, and
the alignment then had no way back — it takes the sum of the segment's
client rects now. And the scale came from offsetHeight, which rounds
half a percent away on a zone one line tall.
A document had one set for all of it, taken from whichever section
declared one last — so a fixture lost its letterhead entirely
and page 1 got the empty header its final section asked for.
A body block now carries `sectionBreak`, ordinal rather than indexed so
editing cannot desync it. Import resolves Word's "Link to Previous" per
reference type; export writes a set per sectPr, and on the ODF side each
section past the first gets its own master page, which the block switches
to. The layer picks a page's set from where pageBreaks reports the
sections starting, and each section's zone reaches ride
`--pb-section-reach` so a later section's letterhead makes room for
itself: page 10 of a fixture was 24.9mm out, now 1.1mm.
Editing still reaches section 1 only; the rest render read-only.