The alert added every attempt of a failed job to the streak, so one job
with two retries read as three failures. It also judged a queue by its
newest job across all accounts: on a queue that runs one job per
account, one account failing every hour beside accounts that succeed
never reached the streak, or flipped between failing and recovered.
The streak now counts jobs, and is kept per account (the job's userId,
or the whole queue for jobs without one). A queue is failing while any
account has failed three jobs in a row, and recovered only when a
failing account has itself run successfully since. A reminder needs a
failure newer than the notice before it, so a one-off job that failed
and does not run again is announced once.
What an account with tens of millions of readings looks like when it
runs into the per-statement limit (empty cards, job.run.failed with
57014), what the full backfill, the hourly heart-rate fold and the
admin alert now do about it, and when raising
DATABASE_STATEMENT_TIMEOUT_MS still makes sense. The variable was only
named in the compose file and the example env until now (#1298).
Forwarding headers were believed from any connection on a private address.
Behind Docker Desktop, OrbStack and docker-proxy every connection to a
published port arrives from the gateway, a private address, so a caller
reaching the port directly could again choose the client address that rate
limits, the audit log and sign-in notices record. TRUSTED_PROXY_CIDRS
(comma-separated CIDRs) now names the proxies: when set, only those peers may
report a client address. The private-range default stays when it is unset,
the boot log states the rule in force in one line, and the reverse-proxy
guide says what to set for a proxy on the same host, on a Docker network, or
on a public address (which, unlisted, puts all clients in one bucket).
An invalid TRUST_PROXY_HOPS threw on every request that resolved the client
address, so every route answered 500, the health probe included. It now
resolves no address, warns once, and is named at boot.
The reproductive-health page promised that deleting all data or the
account erases at once. Both wait for the grace window now, the nightly
dumps keep a record until they age out, and the old pgdata volume is a
full copy until it is removed; the page says so and how to make deletion
final. The README, the getting-started note on majors, the move guide and
the Unraid and Portainer templates catch up with Postgres 18, the backups
volume and the recovery kit. The demo seed's spread bound leaves room for
the seed's own one-in-150 spread.
The fourth rollback step had been joined onto the paragraph after the
list; it is a list item again, with the way back to the data after it.
The disaster recovery page now says how the server tells admins about
its copies: the recovery readiness card, the recovery kit and the hourly
Backup health notification. The support page put GlitchTip under Admin,
General; the card is under Admin, Integrations, as the deploy runbook
says. The pre-migration dump notes say that without the backups volume
no dump is taken, also where the image's own directory is writable.
The flag makes the app believe CF-Connecting-IP from every connection,
before the peer check and whatever TRUST_PROXY_HOPS says, which is safe
only when nothing but Cloudflare can reach the origin. The reverse-proxy
page now says so with the ways to get there, the compose comment and both
example files carry the same condition, and the variable is in the env
manifest. The page's list of peers whose forwarding headers are read now
matches the code: loopback, 0.0.0.0/8, private, CGNAT, link-local,
unique-local and site-local, the reserved blocks and multicast. Those last
two stay trusted, since no internet host can connect from them; a test
pins every listed range and the Cloudflare precedence.
The image creates DB_BACKUP_DIR owned by the app user, so an install that
runs it without the backups volume could write there, and every nightly and
pre-migration dump landed in the container's own layer. The next update
threw them away while the admin page, the boot line and the readiness card
called them kept on this server.
A dump directory now counts as kept only when it survives the container:
inside a container (Docker, Podman, Kubernetes, a container cgroup or an
overlay root) the directory must sit on a mount of its own that is not a
tmpfs, read from /proc/self/mountinfo with a device-number fallback;
outside one, a writable directory is a disk. Otherwise no dump is written
there: the nightly run uploads off-host only and records not_persistent,
the pre-migration dump is skipped with a warning, the boot line says the
directory is inside the container, the backups page stops promising local
dumps and ignores local-only ledger rows, and readiness fails with no
bucket and notes the bucket-only setup otherwise.
The Unraid template gains a path for the dumps, the Unraid and TrueNAS
pages say why it is needed, and the restore drill first runs the stack
without the volume and checks that nothing is kept or claimed.
The client-IP resolver trusted one forwarding hop by default and read the
rightmost X-Forwarded-For entry. Next fills that header with the socket's
address only when the request carries none, so a caller reaching the
published port directly could send its own and choose a fresh address per
request: every per-IP limit (sign-in, second factor, passkey, share unlock,
webhooks) became per-request, and sessions, the audit log and sign-in
notices recorded the chosen address.
The server now writes each connection's own peer address into an internal
header from Node's http.server.request.start diagnostics channel, installed
at boot and overwriting anything a caller sent under that name. The resolver
reads forwarding headers only when that peer is loopback, private,
unique-local or CGNAT, where a reverse proxy sits; a public peer is its own
client address, and a log line says once that its forwarding headers were
ignored. With TRUST_PROXY_HOPS=0 the peer is used instead of no address, so
a directly exposed host no longer shares one bucket across all anonymous
callers. Proxies on the same host, Docker network or tailnet need no change.
The key backup sections become "Save the recovery kit": which keys the kit lists and why, the fingerprint of the token key, and the readiness card with its Backup health notification.
docs/ops/disaster-recovery.md says what is dumped and where, that local
dumps are unencrypted and why, which keys a restore needs and what each
one costs when missing, how to restore onto a new server or back to the
state before a migration, and how the procedure is tested. The deploy
runbook and the getting-started guide now describe the dump the
entrypoint takes before migrating, and the off-host account copy page
points at the dump for rebuilding a server.
Fix two dead anchors (the MCP trust model, the README quick start) and the
statements that no longer match the app: a guardian can connect a managed
profile's services, the environment module is on by default and reaches the
air-quality host too, its readable location columns were dropped in 0409,
settings sections carry their current names, the Withings card lives on
/settings/integrations, the TrueNAS start period matches the image, the
deploy check names HEALTHLOG_PROD_URL, and the docs index describes what
self-hosting/ and integrations/ hold.
The compose file stays on 16. Changing only the image line stops the stack:
the 18 image refuses a data directory from an older major and expects its
volume one level up. The runbook walks the dump and restore into a fresh
volume, keeps the old one as the way back, and is linked from the update
section and the compose pin.
The document picker showed a document deleted in HealthLog as "Deleted
in HealthLog" and would not let it be ticked, so a person who deleted an
imported document by mistake met a dead end exactly where they would look
for it again.
Such a row can now be ticked, and the import sends revive: true for it.
A document still in Recently deleted is restored through the shared
restore, nothing is fetched, and the row reads "Restored from Recently
deleted". One the purge already removed is fetched and stored again, and
only once it is stored does the ledger forget its key, so a failed fetch
leaves the deletion standing. Without revive the route answers "deleted"
as before, and the token upload has no such switch: a Paperless workflow
or the import script re-sending a deleted document is still refused,
whether it is in Recently deleted or long purged.
The search names the document a deleted key still points at (documentId,
null once purged), so the row can say "In Recently deleted" rather than
"Deleted in HealthLog". The outcome gains "restored", sent only in answer
to revive. The row logic moves to picker-rows.ts.
Refs #1275
The TrueNAS page now walks through the catalog install field by field, how
to generate the two secrets, where TrueNAS keeps the key and why that is not
a backup, a dump and restore from the postgres container shell, and updates
with forward-only migrations. The listing is marked as pending review, and
the install-via-YAML values stay for the time until it is live.
The deploy notes list what needs a matching truenas/apps pull request in the
same release cycle: a new or stricter required variable, a port or health
check change, a Postgres major or extension, and any other compose-shape
change.
/api/health gives the database two seconds and answers 503 past that.
With three retries, a pool saturated for a minute after the start period
could mark the container unhealthy and take it out of the proxy's
routing. The compose healthcheck and the image's HEALTHCHECK now allow
five misses (two and a half minutes) and end wget after four seconds,
inside Docker's five, so a stalled request is one clean miss. A test
holds both to these bounds and to each other.
The getting-started requirements now say a host needs 3 GB of RAM, 4 GB
recommended, and drop the advice to lower APP_MEMORY_LIMIT to 1g on a
2 GB host. The compose and .env example comments say the same.
At boot the app reads its cgroup memory limit (v2, then v1) and logs one
line when it is below MEMORY_FLOOR_MB. The support report adds the
container limit and a note below the floor, and Admin > System status
shows "below the supported floor" next to the existing low-heap flag.
The app keeps running either way.
Twenty of the twenty-three soft-delete models were never purged: a deleted
lab result, visit, allergy or cycle stayed in the database, in every backup
and in every key rotation for as long as the instance ran.
soft-delete-retention.ts holds one entry per model that has a deletedAt
column, derived from the schema by a guard with a counter-check. The sync
domains and the document vault keep their purges; every other model is
purged by a new nightly soft-delete-purge job after the sync feed's
75-day horizon, per account under the restore lock and in bounded batches.
A cycle start folded into a live cycle stays while that cycle does, and a
removed coach fact stays for the coach message retention, since stored
trails are withheld against it.
The pressure report re-armed only after the heap fell under 70 % and
half an hour passed, so a heap that climbed to its limit soon after an
85 % report died with only that older report on record. A 95 % tier
now writes the same report at once, whatever the cooldown, and re-arms
under 85 %.
The image sets NODE_OPTIONS so Node writes its diagnostic report to
stderr when the heap runs out, with environment variables and network
interfaces excluded. The heap-diagnostics and scaling docs say how to
keep the flags when overriding NODE_OPTIONS.
Heap figures share one megabytes helper with the support report.
An account whose only strong credential is a primary passkey was refused
auth.stepup.mfa_not_enrolled on every action behind requireFreshMfa, so it
could not create, edit, hand over or delete a managed profile or manage its
guardians, although a passkey sign-in or re-proof already stamps the
session the gate reads.
requireFreshMfa now defaults to the any-possession proof source: a passkey
makes the gate reachable, and a passkey re-proof through the dialog clears
it. The refusal offers passkey in meta.methods, never the password.
hasSecondFactorEnrolled keeps its narrow meaning on purpose. It decides
whether the conditional gates apply at all (account deletion, the data
reset, the password change, the export, offering manage access, the
recent-proof branches and the native Bearer rules), so none of those
change, and password sign-in still challenges only TOTP and security keys.
The MFA-management routes keep the second-factor source. The decision and
its limits are written beside FreshFactorProofSource.
Copy, the OpenAPI description and the sharing and key-rotation docs say
"second factor or passkey" where this gate applies.
Refs #959
Every visible delivery now carries a url. A managed-record delivery to a
guardian and a discreet one open "/", which names no event and no record;
only the silent intake sync push stays without one. The tap-target test walks
every event type across own, guardian and discreet delivery and the channels
that carry the absolute url. Document the forward-auth exemption for the
quick-answer route.
Every raw-SQL clock read against a timestamp column without a zone now
writes NOW() AT TIME ZONE 'UTC', so passkey and login challenges, rate
limits, provider pauses, coach usage stamps, tombstone and measurement
windows no longer pass through the session time zone even where the
per-connection pin cannot apply. The regression-window bounds stay naive
UTC timestamps instead of being turned into timestamptz. A structural
guard keeps bare NOW() / CURRENT_TIMESTAMP out of raw SQL outside a short
list of timestamptz targets. The integration test sets the database
default to Europe/Berlin and drives challenge claims, session expiry, the
native sign-in handoff freshness check and the rate-limit window through
the app's client, plus the challenge claim through an unpinned client.
Self-hosting docs describe the pin for an existing or shared Postgres.
The statement timeout and, since v1.42, work_mem reach Postgres as the
libpq options startup parameter, which PgBouncer refuses unless it is in
ignore_startup_parameters. A host behind it could drop the string by
setting the timeout to 0; work_mem is now always sent, so that no longer
worked. DATABASE_SESSION_OPTIONS_DISABLED sends no session settings,
documented in the example env, the env manifest, the compose whitelist
and the scaling guide.
Fetch the Open-Meteo air-quality feed (CAMS, domains=auto) with the weather:
17 hourly variables folded into local days by fixed rules (means and maxima
only with 18 of 24 hours, ozone as the highest 8-hour running mean, UV only
with the midday hours), a value the feed did not cover stored as null, never
as zero. Requests are cut into 90-day chunks, newest first, and chunks before
mid 2022 ask for the eight pollutant and index variables only. An air-quality
failure never costs the weather row; the day stays unfetched and the nightly
gap fill (up to 90 days per account, newest first) asks for it again.
Every Open-Meteo request asks an instance-wide budget kept in Postgres first
(500 a minute, 4000 an hour, 8000 a day, weighted by the hosted pricing
rule). A refused request is not sent and the run ends as done with
budget_blocked. OPENMETEO_AIR_QUALITY_URL and ENVIRONMENT_AIR_QUALITY_DISABLED
are honoured; the account switch lives on PATCH /api/environment/preferences.
The home, each dated location period and each stored day keep their coarse
location sealed as one value under healthlog/environment-location/v1. The
writers write the sealed value only, the readers open it and fall back to the
readable columns for rows the free-text encryption backfill has not reached,
and the backfill now seals all three and clears the readable columns. The
backup carries the location readable in a portable file and sealed in a
disaster-recovery file; a restore seals either under the receiving key.
Three correlation channels join the environment family (PM2.5, the ozone
8-hour high, the day's highest pollen count), read through the averaged
same-day window and left empty while air quality is off. The Coach and MCP
gain get_environment: module-gated, clamped to the lookback limit, no
coordinate or place name anywhere, with provenance and the attribution
lines. The settings section gets the switch, the coverage and the newest
day's values; the dashboard shows a quiet chip on a day with high pollen,
a warm night or very poor air. Copernicus and Open-Meteo are credited next
to the values.
Getting started names the APP_MEMORY_LIMIT default and how to lower it
on a 2 GB host; the scaling guide says that web and worker share one
pool in the bundled single-container setup. The rollup comment names
migration 0372, which carries the hourly-mean statistic.
At a first start there is no recorded key yet, so an operator facing a
refusal they are certain is false has no row to delete. With
ENCRYPTION_KEY_CHECK=warn (default enforce) the check still runs and logs
its full outcome, /api/health names a mismatch as a warning field without
failing, requests are served, and no key is recorded unless every key id
passes.
The variable is on the compose whitelist, in both example files, the env
manifest, the Unraid and Portainer templates and the published-env guard.
The log block, the mismatch page and the self-hosting pages offer it as the
last resort after the three real fixes, and say that it disables a safety
check.
The boot key check recorded whatever key was configured whenever its probe
found nothing to try. It only read string columns, so an install whose
ciphertext sat in Bytes columns (notes, documents, ECG, symptoms) read as
empty; a probe that ran out of time did the same; and rows written by a
process that served under a wrong key could open on the next boot and get
that key recorded as the right one.
The probe now reads every registered column, string and Bytes, in all four
stored layouts, and tries the oldest values first, ordered by the row's
updatedAt (else createdAt, else primary key). A key is recorded only when
the oldest value that opens is preceded by at most one that does not, or
when no column holds a single value under the key id. A time-out, an
unreadable table, oversized values or mixed results are inconclusive: the
process serves, records nothing and checks again at the next start.
When the first insert loses a race, the stored record is read back and must
open under this process's key, else the outcome is a mismatch.
A rotation that walked every column without errors removes the record of
each previous key id that no longer holds any value. The refusal log block
and the self-hosting pages explain how to reset the check for a key id.
Marc-André Bombeck