A numeric lab reading was stored with its value as received and the marker's
unit stamped on it, so 5.6 mmol/L against a marker kept in mg/dL became
5.6 mg/dL and read as far below range. Both the manual/API write and the
scan commit did this; nothing compared the two units.
- POST /api/labs returns 422 labs.unit.mismatch, with the marker's unit and
the reading's unit in meta, and writes nothing. The unit is compared only
when one was sent: on the biomarkerId path it may be omitted, and the
marker's unit is then the stated one. A qualitative reading has no unit.
- The scan commit skips such a row with reason unit_mismatch, so the outcome
reads partial or failed instead of a clean save, and the toast names the
analytes concerned rather than saying "duplicates".
- The extract response carries the matched marker's unit. The review screen
shows a calm badge on a row in another unit, starts it unticked like a
duplicate, and treats it as a blocking error on the unit field if it is
ticked anyway.
- A small lab-specific normaliser forgives spelling only: spacing, the micro
prefix, the case of the litre, and a unit printed in capitals for a short
list where capitals cannot mean another unit. Case is otherwise significant,
so mIU/L and MIU/L, or g/L and G/L, are never merged.
The document-commit path already refuses a mismatch and is left as it is.
Readings stored wrongly before this cannot be identified, because the
original unit was never kept; they are not touched.
Adds EN and DE strings; the other locales are left to the maintainers. The
OpenAPI spec and the error-code catalogue carry the new code.
Fixes#1094
The form's start defaults to the minute it opened, so a workout logged
right after it finished was stored as ending up to a day ahead. The
duration now fails validation when start + duration lies past now, with
the same one-minute slack the start check uses.
The response-timeout setting reached the briefing, the status notes and
the Coach, which threaded it by hand. Document reads, document
extraction, lab OCR and lab staging called the provider without a
timeout, so every client fell back to its own 60 s literal and a slow
self-hosted model was cut off however high the setting stood.
The setting now rides on the provider instance. resolveProvider,
resolveProviderChain and resolveProviderForTest stamp the record's
aiResponseTimeoutSeconds on everything they return, and each wire
client reads its ceiling through callTimeoutMs: the setting, else the
surface's own timeoutMs, else 60 s. A call site no longer has to pass
it, so a new one cannot forget it. The connection test runs under the
same ceiling a read does.
The Coach nudge tick and the reaction line keep their short ceilings
(timeoutPolicy: "surface-ceiling"): the tick runs accounts one after
another under a shared budget, the reaction line's claim lease is
shorter than the largest setting, and both have deterministic copy
that stands in.
/api/auth/me publishes the effective value as
ai.provider.responseTimeoutMs, so a client can size its own request
timeout from it instead of guessing.
Refs #1090
The dashboard add menu asked only whether the record's section was
writable, so a switched-off mood or medications module still offered its
entry here while the bottom bar's picker hid it. The menu now renders from
the picker's own visibleCaptureKinds, so the two cannot disagree.
Refs #1085
A repeated submit that wrote nothing reads as a neutral notice rather
than a success. The delete control is entered in the destructive-control
registry, and its 409 code in the published error catalogue.
Refs #1085
The dashboard add menu and the bottom bar's capture picker gain a
workout entry next to measurement, mood and medication. It belongs to
the workouts module (capture:workout) and is offered in one's own record
only, because the batch ingest resolves the caller and no grant reaches
it.
Refs #1085
A small sheet with sport, start, duration and optionally distance and
active energy, nothing else. The start is read in the profile timezone,
distance in the reader's unit and stored in metres. It saves through
POST /api/workouts/batch as source MANUAL with an external id minted once
per opened form, so a second tap lands as a duplicate, not a second row.
The workouts page carries the action in its header and in the empty
state; the detail page offers delete for a hand-entered workout.
Refs #1085
DELETE /api/workouts/{id} removes a MANUAL workout outright, with its
child rows and the personal records keyed on it, then queues a silent
detection pass so the previous best comes back. Any other source answers
409: the next sync would write it back. Own record only, 404 for another
user's row.
Refs #1085
The body fat tile was the one strip tile that led nowhere. Its href map
said there was no dedicated sub-page, which was true: body fat percentage
was tiled and charted on the dashboard but never got the Insights page
every body-composition sibling has.
Add /insights/body-fat on the generic metric-page scaffold (body group,
tab-strip pill, seven locales, manual-entry empty state) and link the
tile to it.
Move the tile href map out of the page into tile-destinations.ts, keyed by
the tile-capable widget id and typed against the sub-page slug union, so
a missing or non-existent destination fails to compile. The link passes
the destination's insights-page surface gate, so it never points at a
page a switched-off module hides.
A guard derives the tile set from TILE_CAPABLE_WIDGET_IDS and from the
ids the dashboard actually pushes into its strip, and fails when a tile's
metric has a sub-page the tile does not open, when a destination has no
route, or when a tile links to a page owned by another module. Tiles that
deliberately lead nowhere need a written reason; there are none today.
The reverse-lookup test pinned BODY_FAT as having no page; it now
resolves to body-fat.
Refs #1084
Recharts word-wraps a tick label that it measures wider than its axis,
and it measures in the page's body font rather than the tick's 11 px.
"62 bpm" on the pulse chart under a workout and "106 mg/dL" on the
glucose page therefore broke onto two lines at every width, and the
pulse chart's second line sat on the first x tick. Axis units are now
joined with a no-break space through `axisUnitSuffix`, so the label is
one word and stays on one line. A guard fails when a chart axis joins a
unit with a plain space.
The calendar and clock buttons in the date and time fields paint at
32 px; a `::before` halo now gives them a 44 px touch target without
changing the field.
A date-only value is stored at 12:00 UTC. The lab list and history, the
document cards and pickers, the document date suggestion, extracted
fact dates, source-picker rows and the compliance and mood heatmaps
formatted that instant in the reader's zone, which is the next day from
UTC+12 to UTC+14.
`useCalendarDate` formats such a value through the UTC-pinned calendar
formatter the vaccination list already uses, with the same field order
and locale as instant dates. Lab readings hold both kinds, so
`useLabDate` reads a noon-UTC anchor as its calendar date and a reading
typed with its time of day in the reader's zone. A document without a
filing date shows its upload day, an instant, in the reader's zone.
Range bars and the lab list, detail rows, chart tooltip and reference
ranges printed numbers with a plain `String()`, so a German reader saw
"1.8 mIU/L" and "61.3 kg" under a German interface. The same was true
of the mean, GMI, eA1C and the advanced indices on the glucose panel.
`RangeBar` now prints value, bounds and delta through the locale number
formatter and takes an optional `formatValue` for surfaces with their
own precision. Lab values keep their trim rule (whole numbers bare, at
most two decimals) in `formatLabValue`, which now hands the digits to a
caller-supplied locale formatter; `useLabNumber` wires it to the
reader's locale for every lab surface. Inputs are unchanged.
The time-in-range labels in the doctor report, the target caption on
the glucose panel, the glucose page description and the fasting
explainer printed fixed mg/dL figures, so a reader on mmol/L saw
"Low (< 70 mg/dL)" beside values in mmol/L.
The cut-points now live in one place (`GLUCOSE_TIR_CUT_POINTS`,
`GLUCOSE_FASTING_CUT_POINTS`) with the SI figure each guideline prints,
the analytics engine counts its bands from the same constants, and
every sentence takes the band edges and unit as parameters through
`glucoseBandParams`, formatted with the reader's number format.
The unit-preference guard now also reads the locale bundles: a string
that names mg/dL or mmol/L fails unless it is allowlisted with a
reason.
Refs #1067
The entry form offered pulse but not resting heart rate, which has its own
chart and series, so a value read off a watch or taken on waking could only
land among spot pulses. The form now offers it next to pulse. The server
already gates the type on the recovery module (its resting_hr domain), so
the form, the dashboard summary, the resting-pulse page, its trend slot and
its correlation channel now follow that module too.
Refs #1079
The unit sweep covered the display trees and the insight library; the
prompt and snapshot builders, the text-writing jobs and the target and
digest producers were outside it, which is where a band in mg/dL, a
threshold in kg/week and a distance in metres reached the model. The
sweep now walks those trees too and matches prose units ("kg/week",
"5 metres") as well as symbols. The four allowlist entries for prompts
that stated weight in kilograms are gone with the literals; the new
entries each name why the literal is not a reader-facing unit.
A line scanner cannot see a canonical number printed with no unit at
all, so the guard also names every producer that carries a
preference-dependent figure into a prompt, a snapshot or a stored
sentence and requires each to call a reader-unit resolver. The canonical
weight signal of the day loses its kilogram label; the reader's unit is
attached where the signal is converted.
Refs #1067
The reaction line read the arrived weight with its stored unit (kg) and
a workout distance in metres, whatever the reader had chosen, so the
sentence written about the new reading could quote kilograms to a
reader on pounds. The evidence now converts the reading and the
distance into the reader's units before the prompt is built.
Refs #1067
The weight status note had its own generator and never took the unit
preference: its signal, summary, graded series, latest-day figure,
target band and correlation pairs were all in kilograms, and the card
prompt stated the normal day-to-day swing, the plateau line and the
loss pace in kilograms too. A reader on pounds was handed both units.
The generator now converts every weight figure once after the canonical
arithmetic (the correlations are scale-free and stay as computed), the
card prompt states its thresholds in the reader's unit, and the unit
preference joins the input fingerprint so a switch is never answered
with the old note. The shared status-card examples and the briefing's
plateau pattern no longer show a weight in kilograms for the model to
copy.
Refs #1067
The cycle block's headline contrast labelled weight in kg and the
temperatures in °C, and left a glucose contrast without any unit. The
metric table, which the person sees and whose summary the model reads,
listed weight in kilograms, temperatures in degrees Celsius, walking
speed in metres per second and distance in metres.
The cycle contrast now converts both means and the gap into the
reader's units (the gap by the factor alone) and names the unit in its
sentence. The table resolves each column's unit and decimals from the
reader's preferences and converts every folded period value once; the
snapshot carries the preferences it was written in, so the table and
the snapshot of a turn always agree.
Refs #1067
The Coach snapshot carried weight, body composition, temperatures and
walking speed and distance as stored: kilograms, degrees Celsius, metres
per second and metres, with no unit on the block. The evidence-block
rules then listed kg and both glucose units as the units to cite. A
reader on pounds, Fahrenheit or miles was answered in the units they do
not use.
Every value block now converts its timeline (and the weight block its
aggregate and coarse tail) into the reader's units after aggregating on
the canonical value, and names the unit on the block; the grounding
scalars stay canonical. Workout distances arrive in kilometres or miles
with the unit named once. The prompt in every locale tells the model
that a block's figures are already in the reader's unit and takes the
evidence-block unit from the block instead of a fixed list.
Refs #1067
The daily briefing serialised the aggregated feature set as computed:
weight, grip strength and the weight target in kilograms, waist in
centimetres, glucose and the signals of the day in mg/dL (the glucose
signal carried no unit at all), workout distances in kilometres. A
reader on pounds or mmol/L got a briefing in units they do not use.
One step now converts the feature set after all canonical arithmetic,
on both the nightly and the on-demand path: absolute values through the
full transform, differences and slopes through the factor alone, every
converted block labelled, workout distances under unit-neutral keys.
The prompt, the stored fingerprint and the grounding check all read the
converted set, so a unit switch moves the fingerprint and the grounding
check compares the reply against the figures the model was shown. The
weight target sentence, the comparison block and the GLP-1 plateau
context quote weight in the reader's unit; the comparison block also
labelled sleep as hours while carrying minutes.
A unit switch now also re-warms a cached briefing alongside the status
notes and narratives.
Refs #1067
The reference grounding printed the fasting glucose bands in mg/dL and
the body-temperature band in °C, and the system prompt described time
in range as 70-180 mg/dL. For a reader on mmol/L or Fahrenheit the
model was handed one quantity in two units: the glucose block in
mmol/L, the band beside it in mg/dL.
The grounding block now takes both unit preferences and prints the
general, the diabetes goal and the temperature band in them, while the
placement is still classified on the canonical value. The glucose
block carries the time-in-range band in its own unit, and the prompt
points the model at it instead of naming a unit.
Refs #1067
The acute red-flag clause stated the glucose floors only in mg/dL and the
sustained-fever floor only in °C. The clause is matched against what the
person writes, so a reading of 2.9 mmol/L or 103 °F did not meet any of
its numbers. Each floor now carries both units, mg/dL and °C first, in
the English and German contracts.
Refs #1067
Fill every User column on the source account, export through the streaming
writer, recreate the account with credentials of its own, restore through the
route, and compare: each setting column must come back with the value it left
with, and every identity, credential and bookkeeping column must still hold
the target's value. The section in the file is checked to carry nothing but
setting columns.
Both backup purposes now carry an accountSettings section. The restore writes
it to the account being restored inside the same transaction, names every
refused value under the new accountSetting skip catalogue, and re-warms the
stored texts after the transaction when a unit preference changed, the way the
unit settings routes do. A file without the section leaves the account row as
it is, which is how every older backup restores. The instance settings
restore stays its own opt-in.
Every column of the account row now has a backup verdict in
USER_COLUMN_BACKUP_CLASS: SETTING, CREDENTIAL, IDENTITY or OPERATIONAL. A
schema-derived guard fails on an unclassified column, and the setting columns
each get a codec in account-settings-backup.ts, so a column classified as a
setting without a way to travel does not compile.
The restore end checks each value the way the settings route that writes it
does: AI endpoints against this host's private-origin policy, languages, units
and time zones against the known vocabularies, threshold bands against their
bounds, the avatar against the upload's sniff and limits. A refused value is
left out and named; credentials, identity and the host's own cursors are never
admitted.
The ingest route required integers for the average heart rate and the
sampling frequency. HealthKit reports both as doubles and a watch's average
heart rate is often fractional, so most new recordings were refused with
422 while older ones, whose value happened to be whole, went through. Both
are now accepted as numbers and rounded once before they are stored; the
columns stay integers. A refused body now logs which fields were refused
and why, never their values.
Refs #1060
A column-level round trip over every two-ended model found four values
that left with the export and came back empty or re-stamped:
- MenstrualCycle.absorbedIntoId: the disaster-recovery file carried the
folded, soft-deleted start but not the start that absorbed it, so after
a restore removing the absorbing start could no longer bring the folded
one back. Carried in the disaster-recovery arm and written back only
when the file carries the start it names.
- Workout.externalSourceVersion: the source's version marker, stored so
the sync can replay it unchanged, was in neither end. Carried beside
metadata in the disaster-recovery arm.
- NutrientIntakeDay.externalSourceVersion and createdAt: neither was
selected, so a restored day lost its source marker and its first-arrival
time. Carried in both arms.
Files written before this change parse as before; every new field is
optional on the way in.
A guard that compares a sweep against an allowlist, or against "none of
these may exist", passes when the sweep comes back empty. walkSourceFiles
already refuses a short walk; this adds the same refusal for what a guard
does with the walk.
- requireFloor(label, found, floor) throws below the floor and refuses a
floor of zero.
- scanSourceMatches(root, pattern, { fileFloor, matchFloor }) walks, matches
and floors both the files read and the hits found.
Floors added, pinned at the current counts:
- coach_usage owner columns: the clauses it actually examined (6).
- measurement reference index: the foreign keys it extracted (2).
- job outcome fact inventory: job files (130, floor 120) and fact keys
(399, floor 350).
- tone harness: assessment prompt modules (11).
- coach locale default: turn pipeline modules (15, floor 12).
- locale integrity: message bundles (7).
- settings card header coverage and settings anatomy: the walked cards.
- coach metric scope inventory: insight route sources.
- side-effect drift guard: both enums populated, since two empty keysets
are equal.
The pill-mapper guard walked with globSync, which skips dot-prefixed
directories; it now walks through walkSourceFiles like the rest.
A PDF longer than the pages a scan renders was read from its first ten
pages, and the cut was recorded only in the wide event. The person checking
the extracted rows had no way to know that values on later pages were never
read.
The rasterizer now returns the PDF's page count, the extract response
carries pageCoverage { read, total } when the cap applied, and the review
screen says how many of the pages were read.
A segment whose stage label was unknown (SLEEP_STAGE_TYPE_UNSPECIFIED, or a
label added upstream later) was skipped without a trace, so the night total
read short and nothing said why. The mapper now counts those segments and
keeps their labels, and the sleep sync puts both on its wide event.
The suite and the production image both sit near UTC, so a UTC day and a
local day agree for most of every day and day-boundary defects kept
passing. The harness sets the host zone in code to Los Angeles and to
Kiritimati, gives the account the same zone, and checks a schedule slot,
a course's last day, a mood entry, the dashboard summary's mood instant
and a document date round trip at the instant where the local and the
UTC day differ. Unit tests cover the new date-only and key helpers.
An unknown or archived tag key, or a factor the catalog no longer carries,
was dropped on the way in while the entry still reported "inserted" (bulk)
or 201 (create, edit). A client had no way to tell that part of what it sent
never landed.
Each write now names those keys: the bulk result per entry, the create and
edit responses on the entry, as droppedTagKeys and droppedFactorKeys. Both
are present only when non-empty, so a response where everything landed is
unchanged. An archived tag an edit preserved is on the entry and is not
listed. The web shows a short notice after saving when a picked tag was left
off.
`instant.toISOString().slice(0, 10)` and parsing a key back as UTC
midnight are the idioms behind every day-boundary fix this year: the
evening west of UTC and the small hours east of it land on the
neighbouring day. A new rule, healthlog/no-utc-day-key, refuses them in
src/ outside src/lib/tz and tests, and refuses a disable directive for
itself that is not next-line or gives no reason.
The time zone module now names every legitimate form: userDayKey for a
person's day, dateOnlyKey / dateOnlyAtNoonUtc / dayKeyAsUtcMidnight for
date-only values and day labels, daysBetweenDateKeys / weekdayOfDateKey /
isCalendarDateKey / statedDateKey for key arithmetic and parsing.
Of the 133 sites the rule found, 84 are gone. Most moved onto a named
helper with no change in behaviour; these changed behaviour:
- cycle calendar, insights, Coach snapshot and prediction refresh start
their lookbacks at the first instant of the user's day
- a model-transcribed date like "June 10, 2026" no longer lands a day
early in a process east of UTC (documents and lab scans)
- a custom report range covers exactly the picked days in the profile
zone instead of starting the evening before west of UTC
- date-of-birth pickers cap at the user's today, not the UTC one
- an allergy onset date is stored at noon UTC like other date-only values
- the report's cycle summary, the Coach's usual BP range and the intake
projector's rollup recompute use the user's day
- vaccination dates render as dates instead of the previous evening
49 remain, each with its reason on the line above: 39 UTC by design (15
file name stamps, rollup and object keys, the UTC-day score engines) and
10 marked baseline. A guard test requires a classified reason on every
directive and holds the baseline to a ceiling that only goes down.
The intake pickers chose their default from every active medication, so a
course that had ended but was not archived could be the preselected dose.
The default now reads the server's intakeActionable answer; the medications
page dialog still lists ended courses for back-filling a past dose, they are
just never the default.
Both pickers also graded "due" against the fixed 120 / 240-minute defaults
while the cards beside them used the account's own late and missed
thresholds. They read the same thresholds now.
The blood-pressure chart rebuilt its target zones in the browser from the
signed-in account's date of birth. A band the person had set themselves never
reached the chart, and inside a shared or managed record the zones followed
the viewer's age instead of the record's.
The targets payload already resolves for the record on screen. Its blood-
pressure card now honours the user's own band too (labelled Custom, like the
weight card), and the chart reads its zones from that card, so the chart and
the reference panel under it name one band.
The scan commit and the review screen looked for an existing reading in
the UTC day of the scanned date. A hand-entered morning draw east of UTC
sits on the previous UTC day, so scanning the same report wrote the
reading a second time. Both checks now compare calendar days: a date-only
reading's stated date, or the user's day of a hand-entered instant.
BernhardBuckel