The CSV import wrote its audit row in a finally block, so an audit write
that threw discarded whatever the import had settled on: the result of
a finished import, the 413 of a file over the cap, or the error of one
cut off part way. The failure is now noted on the wide event and the
import answers as it would have.
The beyond-horizon line said the range held "for more than {years}
years, the span your readings cover", but the horizon is capped at three
years, so a ten-year history was told its readings spanned three. The
trend now says whether the cap or the span set the horizon
(`horizonCapped`), and the card words each case on its own in every
locale.
The tool kept its own CUSUM with a plain standard-deviation bar, so the
per-metric floors and the drift rejection the health-status scan gained
never reached it, nor the medication-effect note that reads it: a 0.6 kg
weight step or a steady climb still came back as a dated shift. The tool
now segments the series with the shared detector, recursing on each side
of a shift with the same bar and the metric's floors. The output shape
is unchanged.
The 100000 ceiling refused offsets a correctly paging client reaches on
its own: an Observation series with a heart-rate history runs well past
a hundred thousand rows, and the next link the server handed out led
straight into a 400. The 500 the ceiling was added for came from an
offset such as 1e20 that no longer floors to an exact integer and that
the database cannot read as an OFFSET. The refusal now sits at the
largest exact integer, and a next link never carries an offset the
server would refuse.
The strain run writes no impulse row on a day without a scorable workout
or active energy, so a rest day for someone without daily active energy
was never rated: fitness and fatigue held for months instead of
decaying, and the figures named the last stored day while the coverage
count ended there too.
A day without a stored impulse is now classified from the underlying
data: a workout on the day leaves it unrated, steps, heart rate or
active energy without a workout make it rest, and no data at all leaves
it unrated. The series runs to the day the strain run scores, so a
stretch without data after the last rated day shows in the coverage
count, and the card names the last rated day when it lies further back
than the day before.
The switch was stored and shown, but nothing reads the topics flag
yet, so the page promised a change it could not make. The section,
its nav entry, its loader and its copy are gone, so its palette
entry goes with them; /settings/preview is no longer a route. The
stored flag, /api/settings/preview-features and its backup round-trip
stay, and the column's pending-consumer note says why.
The note named the activity goals among the three new readable routes.
They are the calendar read and the two source provenance reads; the
goals route stays owner-only.
An offset beyond what the database can skip reached Prisma unchecked
and answered 500. Every search route now refuses an _offset above
100000 with an invalid OperationOutcome.
The lab, medication and measurement CSV routes ignored parameters they
did not know, so a misspelt dryrun=1 fell back to a real import and
wrote the file the caller meant only to check. Their query schemas are
strict now: an unknown parameter answers 422 before anything is read
or a rate bucket is spent.
Every accepted row was its own insert, so a 20 000-row file meant
20 000 round trips and an import cut off part way left an arbitrary
prefix behind. Each 200-row chunk is now one createMany: it lands whole
or not at all, and uploading the same file again skips the written
chunks as duplicates. The importers report each committed write, and
the audit row is written in a finally block, marked partial with the
rows written when the import did not finish.
The rows were parsed in the query's timezone while the duplicate keys
used the account's, so two draws on separate days of the file's zone
could collapse into one, or one day split in two.
The effect is fitted on up to 90 days before a start and 180 after
it, which can lie outside the report period. The PDF notes and the
clinician view now state the fitted window for every effect shown.
The effect block names every medication it describes and its
confounders, so a report or share link that withheld the medication
list still carried the names. The aggregator now loads the block only
when both leaves are admitted, the clinician view checks the list leaf
as well, and the leaf label says it needs the list.
Two rows of one workout slot from sources off the ladder were both
kept by the picker and their impulses added. Only one source's rows
now count per slot, a source off the ladder ranking below every
listed one. The day's active energy, the strain fallback signal,
summed every source; it now goes through the activeEnergy source pick
and keeps one source's total.
The automatic Newey-West rule gives a lag of 3 on 30 to 270 daily
values, which leaves most of a physiological series' carry-over out of
the intervals. The lag is now at least 7. Reference values are
recomputed with statsmodels at the new default, and the lag-3 values
stay pinned with an explicit lag. A fit whose residual autocorrelation
exceeds 0.5 is flagged, and the card, the clinician view and the PDF
say the ranges may still be too narrow.
A day without a stored training impulse was read as a rest day, so a
watch left off or a nightly run that had not happened yet pulled
fitness and fatigue toward zero. Such a day is now not rated: the
averages hold through it, the series marks it, and the card says how
many of the last 42 days were rated. A scored day of 0 stays rest. The
figures describe the last stored day rather than always yesterday.
Each scanned vital gets a minimum level change and a spread floor at
about its clinical and device resolution, so a VO2 max estimate that
steps by 0.3 or a clean 2 bpm change no longer reads as a shift. A
series a straight line explains at least as well as a step is a drift,
not a dated shift. The magnitude is capped at 10 so the flattest series
cannot win the ranking.
Today is shown as in_progress instead of being placed against whole
days, and a running period is compared over its completed days only:
the total through yesterday against the usual rate times the days
completed. The period total and goal progress still count today. The
comparison gains completedDays and completedValue.
A marker whose newest reading is more than a year old is now reported
as of that reading (projection "stale"), with no exit date and no
already-outside verdict. The projection horizon is capped at the span
the readings cover, so a line is never carried further ahead than the
data reaches back. The detail read keeps the newest 2000 readings
rather than the oldest.
The health-status read scanned five vitals over 90 days for a dated,
sustained level shift. It now scans every vital with a stable daily level
(adding RMSSD, diastolic pressure, pulse, body fat, respiratory rate,
oxygen saturation, walking heart rate and VO2 max) over 180 days, reads one
value per day per metric, leaves a metric unread when its module is off,
and reports how many days stand on each side of the break. The Coach keeps
its five-metric, 90-day scan unchanged.
Settings > Export & Import gains a card that reads the head of the file,
suggests the column for each field from its header in eight languages,
suggests the separator, decimal mark and date order, and lets every
choice be corrected. The check lists each refused row by line and the
markers the names land on; the import button names how many rows it
will write. Templates for both kinds download from the sheet.
Two streamed endpoints read a spreadsheet record by record with a
column mapping from the query: separator, decimal mark, date order and
zone are stated, never guessed per row. Lab rows resolve to markers the
way scanned reports do, convert units where the conversion is known and
keep what the file said; medication rows map name, dose, daily times,
as-needed and a dated window, checked against the create schema, with
reminders off unless asked for. A dry run writes nothing, a re-upload
only finds duplicates, and every refused row comes back with its line
and reason.
The first page of the workout list now carries the fitness-fatigue model
over the day-total heart-rate impulse the nightly strain run already
stores: fitness as the 42-day and fatigue as the 7-day exponentially
weighted average, form as their difference. A day without a stored impulse
counts as rest. It needs 28 days and three training days, flags the first
six weeks as warming up, and reads in the person's own units only. The
workouts page shows the three figures above the list.
/api/health gives the database two seconds and answers 503 past that.
With three retries, a pool saturated for a minute after the start period
could mark the container unhealthy and take it out of the proxy's
routing. The compose healthcheck and the image's HEALTHCHECK now allow
five misses (two and a half minutes) and end wget after four seconds,
inside Docker's five, so a stalled request is one clean miss. A test
holds both to these bounds and to each other.
The UI standards drop working shorthand, state the spacing scale once in
section 2 (section 13 had listed an older scale without 2.5 and 3.5) and
use no em dashes. The v1.3 to v1.4 migration note no longer claims that
/settings#anchor URLs redirect to their section: the fragment never
reaches the server. A test holds both documents to this.
The Topics preview describes what it will add, the workout-route detail
says off for new accounts, and German reads 'Zurück zu den Modulen',
'Unter Module ändern', 'Unter Anordnung öffnen' and 'Erfassung' for
the Tracking group. Strings that name the Insights area call it
Insights; generic uses of Auswertung stay.
The room-climate guide said both to create one automation per room and
to track only one; it now recommends the bedroom and says why a second
room cannot work (no room name, same-minute pushes collide on 409). The
blueprint offers 5, 10, 15, 20, 30 or 60 minutes, so the push lands on
the stated minutes, and it and the guide's examples use the triggers,
conditions and actions keys of Home Assistant 2024.10 and later. A test
holds all three.
The assessments list now carries, per PHQ-9, GAD-7 and WHO-5, the latest
total against the previous and the first administration, classified
against the change studies treat as meaningful: 5 points on the PHQ-9,
4 on the GAD-7, 10 on the WHO-5 percentage scale. A smaller change reads
as within the threshold rather than better or worse. The instrument
detail states each change and whether it reaches that size, in neutral
words. The read takes totals and dates only, never an answer.
The Coach overlay had become a read-only line with a link to Settings >
AI, which took away switching the model mid-conversation. The provider
and model selects are back; they write through the same routes and the
same stored preference as Settings > AI, so there is still one setting,
and the link to Settings > AI stays below them.
The Telegram, ntfy, webhook and email cards had folded the enable
switch into the form, so turning a channel off took a Save as well.
The switch saves on tap again, optimistically with a rollback, and sits
outside the form; the form's Save covers the channel's fields and sends
the stored enable state unchanged.
The save-model guard now splits a card into save units, each form and
the rest of the card, and refuses a unit that mixes both models: an
instant switch inside the form its Save submits, or a Save outside any
form next to one, still fails. A form shows its refusal inline only,
no longer as a toast on top.
A read-only view per metric and UTC day: every source with readings, its
day value, its place in the person's source priority, and which source
the charts use with the reason. A second card lines two sources up over
30, 90 or 365 days. The pick is explained from the rank the canonical
SQL returns, so the page cannot disagree with the charts. Linked from
the metric pages and from Settings > Source priority.
The week label and each day's accessible name went through the
zone-aware formatters, which show a noon-UTC day key as the next day
east of UTC+12. Read them in UTC like every other stated date.
GET /api/fhir/Observation keeps its snapshot answer when no date is
sent. A date range (FHIR prefixes eq/gt/ge/lt/le, UTC when no offset)
switches it to the time series: every reading in the range plus
workouts, newest first, paged in the database through one UNION id
query and a count, so a page costs what it holds. Series ids are the
row's own (m-<id>, w-<id>) and read back through /Observation/{id}.
The series replays the same saved report selection as the snapshot,
pairs systolic and diastolic recorded at one instant into the
blood-pressure panel, leaves sleep stage segments out, and reads an
hourly heart-rate bucket as a mean over its hour. A code parameter
narrows either answer; a malformed date is a 400 OperationOutcome.
A workout is an activity Observation after the Physical Activity IG:
LOINC 73985-4 with the sport as its value and duration (55411-3) and
energy (41981-2) as components. RMSSD gets its own registry coding,
text-only because LOINC has no RMSSD term, so it never borrows the SDNN
code. The capability statement lists the two new parameters.
The standard report template now carries sleep duration, heart-rate
variability as two labelled rows (SDNN and RMSSD), daily steps, a
per-sport workout summary and the change around each medication start.
Each still rides its module, and the template is still only applied by
the button that names it; saved selections and share links are
untouched.
Two structured leaves join the catalogue: WORKOUTS (activity group,
workouts module) and MEDICATION_EFFECT (medications group). The workout
block reads narrow rows through the canonical-workout picker and sums
them per sport. The effect block reuses the efficacy loader with the
report's end as its horizon, carries a target only when that target's
own measurement leaf is admitted, and is capped at eight medications.
In the PDF the wearable series chart at half width, two to a row, in
the units the table prints; the workout and effect blocks are compact
tables with short notes. The clinician view renders both blocks from
the same payload. RMSSD joins the dense day-bucket path so long windows
stay aggregated.
A same-page link to a moved anchor changes only the hash, so the
arrival check never forwarded it; the shell now also listens for
hashchange. The legacy-routes guard walks the component tree of every
forward target's page and fails when the anchor it forwards to is not
rendered there.
The biomarker detail read now carries a trend: the least-squares line
through every numeric reading of the marker (all stored in its unit), with
the slope's 95 % interval and p-value. It needs three readings over at
least a year. The line is placed against the marker's band, and an exit
date is given only when the interval excludes zero, the line is inside the
band today and reaches a bound within three years. The detail page words
it as a straight-line projection, not a forecast.
The efficacy tab keeps its before/after comparison and gains, per metric
target, the level change and the change in weekly trend at the start,
each with a 95 % interval. The fit covers up to 90 days before and 180
after the start and ends before the first dose change. After the start,
days are left out when fewer than 80 % of the doses of the preceding 14
days were taken (cadence-aware, from the dose ledger) or when the
medication was paused or between courses. Other medications that
started, stopped, changed dose or paused inside the window are listed.
Below 14 days with readings across 21 days on either side the view says
what is missing instead of showing numbers.
The efficacy response gains a nullable segmented block per target.
The checkups page links to the checkup reminders under Notifications
and the screening hints under the health profile, the two cards that
left its settings in this release. Data & privacy gets a row pointing
at sessions and devices under Security.
Both routes resolved through bare requireAuth, which refuses a session
acting for another record, so the list view controls and the preview
switch failed in exactly the context they are used in. They are the
person's own presentation and now resolve through requireActorAuth,
admitted on the actor-surface list with their reasons.
The layout PUT and the preview PATCH read and write the stored blob
under a row lock in one transaction, so two saves at once no longer
start from the same value and drop each other's change.
A four-parameter interrupted time series fit (pre-trend, level change,
slope change) by OLS, with a Bartlett-kernel HAC covariance, the n/(n-k)
small-sample factor and Student t intervals. The tests pin the
coefficients, standard errors and intervals to independently computed
reference values on contiguous and gapped series.
Posts one batch for two accounts with the same stored rows, once as the
route runs and once with the set-based insert forced onto its fallback,
and asserts identical per-entry outcomes and stored rows across fresh
samples, a stored duplicate, a tombstone, a stats: overwrite, an
external id twice in the batch and a natural-key collision.
0440 adds its columns with ADD COLUMN IF NOT EXISTS like 0424 and
0432; a structural test holds every migration from 0422 on to that
form. 0430 clears insights_cached_at where no sealed payload is left,
so the nightly pregenerate refills an account whose only copy was the
readable column instead of keeping an empty card fresh.
The deploy runbook notes that 0430 drops a users column: an old process
fails on its next full user read, so stop before starting rather than
running old and new side by side.
Marc-André Bombeck