Entering the Insights overview fired every section's reads at once, about
two dozen requests on a seeded account, and the server worked through
them in a queue: the hero and the first sections waited behind trends,
the period review, cycle, signals, rhythm events, health status,
breathing, labs and ECG, all far below the fold.
The first three sections in the account's own order still mount with
the page. Every later one renders a 1 px sentinel until it comes within
400 px of the visible area of the shell's scroll container, then mounts
and fetches; once mounted it stays. Measured on a seeded account under a
4x CPU slowdown: 24 -> 13 requests on entry, the entry network span
1.3-1.8 s -> 0.5-0.9 s, LCP about 1.35 s -> 0.9 s, blocking time about
550 ms -> 200 ms. Scrolling to the end still loads all 25 and renders
all ten sections.
Specs that assert on, measure or scan the lower sections scroll them in
first through a shared helper, so their coverage is unchanged.
The medications list and the compliance summary refetch on every mount,
so a take or skip logged on another device shows on return (#316). The
nav link's hover / touch / focus intent and the route-commit preload
prefetch both reads too, so every visit through a link sent each of
them twice: the prefetch, then the identical request from the mount a
few hundred milliseconds after the first answer landed.
The mount now skips its refetch only when the cached data answers a
prefetch that went to the network for this visit: within the last 10 s,
and since the route last left /medications. A direct load, a return
with an older entry, or a quick return whose prefetch found the entry
still fresh keep the refetch on mount.
A weekly or nightly backup job whose process died (a restart, a
container out of memory) stayed active until its two- or four-hour
expiry, and its retry walked the accounts in the same order: the account
that killed it has the oldest copy, so it led again, and every account
after it went without a copy for as long as that record stayed too
large.
Both passes now send with a five-minute pg-boss heartbeat, so a dead run
fails within minutes and its retry picks it up. Each pass records when it
started and finished every account (backup_pass_attempts, migration
0373); an account whose last attempt never finished goes behind all the
others. The backups page shows when the run in progress started and names
an account a run died under, for the weekly and the off-host card, and a
heartbeat timeout reads as what it means.
Since v1.39.6 the preview scanner parsed the JSON on its way into the
pieces, kept every section but the three bulk tables, and validated the
whole document at the end: a second copy of the record beside the
writer's own, inside the weekly job. On an account with a document vault
that is most of the record.
The writer now shows each section and each bulk row to an observer just
before writing it. The preview collects key uses from that and takes its
counts from the writer's own FullBackupCounts; nothing is parsed or kept.
An upload hands over the summary and key uses it has already validated.
The round trip pins the writer's counts and key uses to a full read of
the copy on an account with a row in every model, and a memory test holds
what the pass keeps once the producer is done.
Measured on 70,000 measurements, 3,000 mood entries and 40 one-megabyte
documents under --max-old-space-size=524: held after the producer
56 MB before, 3 MB after; peak heapUsed 398 MB before, 334 MB after.
The tracker posts to `${data-host-url}${collect path}`, and the collect
path is compiled into the operator's Umami build: /api/send by default,
anything else when the instance sets COLLECT_API_ENDPOINT. The tag
pointed data-host-url at the app origin and the proxy listened only on
/api/send, so a renamed endpoint sent every page view and event to an
app path that does not exist and got a full 404 page back each time.
Point data-host-url at /api/monitoring/umami and answer every path under
it with one proxy route. The route reads the collect path from the
configured tracker (cached for an hour), forwards only that path to the
Umami host, and answers anything else, or an unreadable tracker, with an
empty response. The admin test event posts to the same learnt path. The
send-URL resolver lives in one module instead of two copies.
The systolic and diastolic reads each took the ladder's source per day on
their own. Whenever a source held only half of a reading on a day (a deleted
diastolic, an orphaned sample, a sub-floor systolic), the two picks diverged
and the pairing joined one source's systolic to another source's diastolic.
A sub-floor systolic could also claim a day and then contribute nothing,
leaving the day empty although a lower-ranked source had a valid reading.
The source is now picked per day from the systolic rows that pass the floor,
both halves are read from it in one statement, and a pair is only made
within one source, which also covers a reading that straddles midnight.
src/app/favicon.ico was still the filled heart from the first release on a
solid white square. Next serves it next to favicon.svg, and browsers that
pick the ICO (Safari, bookmarks, history, some tab states) showed the old
icon on a white slab. It is now the current logo at 16, 32 and 48 px with a
transparent background.
The dashboard summaries, the insights aggregate and the series stats strip
still took a plain mean over pulse readings for their 7-day, 30-day, prior-month
and all-time figures, while the year-ago figure and the chart already weighed
each day once, so the year delta compared two different statistics. They now
go through the day-mean helper: each day is the mean of its hours' means and a
window the mean of its days, in the frame each reader buckets its days by.
Count, min, max, the median and the spread stay over every reading; every other
type is unchanged.
The blood-pressure branch of /api/measurements/series still read systolic and
diastolic with an unranked findMany, so with a second provider the pairs blended
both sources and a reading present in both showed twice, while the other kinds
already follow the ladder since the dense and raw reads were moved onto the
shared helper.
Each of the two types now reads the ladder-winning source per day through the
same helper. The physiological floors (systolic 40, diastolic 20) and the
five-minute pairing are unchanged.
Reasoning models on Ollama and similar servers think by default and can
spend the whole max_tokens budget before the visible answer starts, so
the call comes back empty or times out. The Local and OpenAI-compatible
chain entries now carry an optional reasoning setting: Default sends
nothing, Off sends reasoning_effort "none", Low / Medium / High send
their own value. It is stored on the entry in aiProviderChain, so a
chain can mix a thinking model with one that does not know the field.
- Every exported resolver binds the entry's value onto the client, the
connection test included, keyed on the instance type so the operator
provider, OpenAI, Anthropic and Codex never carry it.
- PATCH /api/user/ai-provider accepts localReasoningEffort and
compatReasoningEffort and GET reports them. A provider absent from
the chain holds its value on a disabled entry; restating Default on a
chain that was never customised writes nothing.
- PUT /api/insights/provider-chain accepts reasoningEffort on local and
openai-compatible entries, refuses it on any other, and keeps the
stored value when the body leaves it out. Its schema is now shared
with the OpenAPI registry.
- A Default request body is byte-identical to the one sent before.
Refs #1126
A watch samples pulse about every 5 to 10 minutes at rest and about every
5 seconds in a workout. The daily value was the plain mean over a day's
readings, so a workout hour of several hundred readings outweighed the other
23 hours: a day with one hard hour and 23 resting hours (60 bpm) read about
128 bpm, not 64.
A day of pulse is now the mean of its per-hour means, in the rollup DAY
bucket, the live per-day read the chart serves, and the series route's day
grain. Windows over several days weigh each day once instead of by its
reading count, so the bias does not return one level up. Reading counts,
min/max, and the regression sums still run over every reading. The chart
tooltip and the data table name the statistic, in all seven locales.
The statistic is limited to pulse; HRV, SpO2 and glucose keep the plain mean
(see src/lib/measurements/day-statistic.ts). Stored DAY rows are rewritten by
the next rollup recompute (admin recompute route), not on read.
Fixes#1107
The replay cell was keyed on (user, key, method, path). A client that sends
two different writes under one key got the first write's cached response for
the second, and the second was never saved. Native clients up to 1.1.0 post
the two halves of a manual blood pressure exactly that way, so the diastolic
value was silently dropped.
Each cell now stores a SHA-256 fingerprint of the request body (JSON with
recursively sorted keys, otherwise the raw bytes; scoped by method and path;
at most the first MiB is read). Lookup replays, or refuses as in flight, only
when the fingerprint matches. A different body, or a row written before the
column existed, runs the handler without claiming or caching and leaves the
existing cell for its own retries; a lost claim race re-checks the winner's
fingerprint the same way. The body itself is never stored.
Migration 0371 adds the nullable idempotency_keys.request_fingerprint column.
The OpenAPI parameter description, the client notes and the Home Assistant
guide say what a replay now requires. docs/ops gains a read-only query that
lists systolic readings left without their diastolic half, held to the
schema by an integration test.
The update retried without pausedAt and notificationsEnabled for a
database that lacked the columns. Migrations guarantee both, and inside
the transaction a failed statement aborts it, so the retry could not
work anyway.
The row update (name, schedule, oneShot) committed before the course
write. When a concurrent course made the course write refuse, the client
got the refusal while the rest was already written. The schedule replace,
the row update, the pause era and the course write now commit together,
so a refusal leaves the medication unchanged. The rollup recompute runs
after the commit.
At a first start there is no recorded key yet, so an operator facing a
refusal they are certain is false has no row to delete. With
ENCRYPTION_KEY_CHECK=warn (default enforce) the check still runs and logs
its full outcome, /api/health names a mismatch as a warning field without
failing, requests are served, and no key is recorded unless every key id
passes.
The variable is on the compose whitelist, in both example files, the env
manifest, the Unraid and Portainer templates and the published-env guard.
The log block, the mismatch page and the self-hosting pages offer it as the
last resort after the three real fixes, and say that it disables a safety
check.
apiHandler answers 503 encryption.key_mismatch before auth, but the remote
MCP endpoint and the OAuth authorize, token and register routes wrap in
withBackgroundEvent instead and never checked. An MCP write tool could seal
new rows under the wrong key, and those rows would open under it at the
next boot.
The refusal moves into one helper used by apiHandler, /mcp (same envelope)
and the OAuth routes (RFC 6749 temporarily_unavailable with the error code
as an extension member). A structural test fails when a route outside
apiHandler, or a server action, lacks the refusal in every exported handler
and is not on a short allowlist of routes that never touch the database.
The PUT wrote startsOn/endsOn on the row and then rewrote the latest
course in a second transaction, so a failure between the two left the
row and its courses disagreeing. The window now reaches the row only
through the course writer, which writes both under one lock.
The paragraph described the old values. It is deleted with them, its generation claim is detached the way a delete detaches it (the day's slot stays spent), and the workout's arrival is raised again so the paragraph is written from the corrected values through the ordinary path, under the same daily cap.
The history minted bands only from the latest course, so misses in an
earlier course counted in the rate and appeared nowhere in the history.
It now mints over the span of every course and keeps the slots on a
course day. The compliance ledger and the cadence missed tally drop the
gap slots before the reconstruction instead of after it, so a dose
logged between courses stays visible as an off-schedule take in both.
An iPhone build that predates custom categories decodes an unknown category
as OTHER and sends it back on every edit. A Bearer update sending OTHER over
a custom category now keeps the custom one; the web can still move it back.
A medication taken now and then (#1024) keeps one row and gains course
rows: calendar spans, both ends inclusive, an optional encrypted note, no
schedule or dose of their own. Courses never overlap and every course but
the latest has ended, so the latest course is always the one the
medication's startsOn/endsOn project. src/lib/medications/courses.ts is
the only writer of those two columns for a medication with courses; it
writes under a per-medication advisory lock and re-projects in the same
transaction, so reminders, the next-due line and intakeActionable keep
reading the columns and stay right.
- Migration 0368 adds medication_courses and backfills one course per
medication window (an end-only window starts on the creation day, or
on its end day when that lies earlier); a medication without a window
stays course-less. Idempotent, data-preserving.
- GET/POST /api/medications/{id}/courses and PATCH/DELETE
.../courses/{courseId} (owner-only); create seeds the first course
from a window; the medication PUT edits the latest course and refuses
a window that would break the rules (medications.course.*).
- List, detail, create and update carry courses, courseCount,
previousCourseEndedOn and canStartCourse, resolved on the server.
- Compliance expands over the span of all courses and drops the slots
between them; every compliance read selects the courses. A rolling
cadence is not anchored by an intake from a previous course.
- The card names the last course's end and the running course's number;
the detail Lifecycle group lists the courses with start, edit and
delete. The Coach compliance block, the MCP resource, the doctor
report window and table, the clinician view and FHIR (one
MedicationStatement per course with effectivePeriod and status) read
the courses.
- Backup carries courses per medication and the restore writes them and
re-projects; an older file derives the one course its window
describes. Wipe plan, encrypted columns, rotation and OpenAPI follow.
The full backup now reads the account's own medication categories, and
three route tests that drive the payload builder against a mocked client
had no delegate for it.
The full-backup route tests mock the symptom definition read the payload
now makes; the destructive-control registry names the symptom hooks (an
entry or a whole symptom, confirmed by an AlertDialog); the symptom quick
entry's save toast is pinned beside the measurement and mood forms it
mirrors.
A medication can be filed under a category the person named, next to the
built-in ones (#1041). The labels live in medication_category_labels,
encrypted at rest, capped at 20 per account; a medication filed under one
carries its custom:<uuid> key in the category column.
- GET/POST /api/medications/categories (POST idempotent, 30/min per actor,
admitted at MANAGE like the cycle symptom vocabulary) and owner-only
PATCH/DELETE /api/medications/categories/{key}. DELETE moves every
medication filed under the category to OTHER in the same transaction
and answers movedCount.
- category is widened to a built-in value or custom:<uuid> on the wire,
the create and update bodies refuse a key that is not the caller's
(422 medications.category.unknown), and list, detail, the insights
medication tiles and the MCP medications resource carry categoryLabel.
A key with no owned label reads as OTHER and is counted on the event.
- The wizard's class step lists the person's categories under the
built-in rows with an inline add row; the list page gains a category
filter (session only) and a manage sheet for rename, hide and delete.
- Backup carries customMedicationCategories (decrypted labels) and the
restore writes them before the medications; wipe plan, encrypted
column registry, rotation script, sharing guards and OpenAPI follow.
The extract route accepts `Prefer: respond-async` for all three inputs
(text, stored, vision) and queues a DOCUMENT_EXTRACT run (added to
migration 0370). The run's result is the count of staged facts and the
document status; the facts themselves are read from the document.
Without the header the route answers with the document detail as
before; both paths run one shared body.
A background read can take minutes, and a review the person finishes in
the meantime must not have its approved facts replaced. Staging now
locks the document row and asks again whether it may stage, refusing
with the route's own alreadyConfirmed / alreadyPartlyConfirmed codes.
The synchronous path gets the same re-check.
The vault's stored-text extract uses the background path and shows the
shared waiting line in place of its hint while the read runs.
Every active symptom definition enters pattern discovery as an outcome
channel SYMPTOM:<id>, labelled with its decrypted name (the data label
the interpretation already prefers over the key). The daily value is the
day's highest intensity in the person's zone; days without an occurrence
count as 0 only between the first and the last logged day. At most eight,
the active-definition cap. The SYMPTOM: prefix resolves to the illness
module in the surface map, so the family leaves the matrix with the
module, and the discovery guard lists the new fetcher.
A symptom of one's own ("aura", "headache") is a definition with an
encrypted name and an icon from the cycle custom-symptom allowlist; each
occurrence carries a time, a 0-10 intensity (the pain score's scale), an
optional encrypted note and an optional link to one of the record's open
illness episodes. Both ride the illness module: every route answers
illness.disabled when it is off.
- Migration 0369 (idempotent): symptom_definitions and symptom_events,
intensity CHECK 0-10, episode link ON DELETE SET NULL.
- /api/symptoms/definitions{,/[id]} and /api/symptoms/events{,/[id]}:
eight active definitions per record (a hidden one frees its slot,
showing it again re-checks), hide or purge, events create/list/edit/
delete, a new link must name an open episode of the same record
(422 symptoms.episode.notOpen). Error group symptoms.*.
- Sharing: reads at READ, logging an occurrence at WRITE, defining and
editing at MANAGE; C1/C3/C4 audit details; frozen lists, the handler
matrix and the activity verbs updated.
- Both encrypted columns registered and rotated; both models in the wipe
plan; both carried at both backup ends with occurrences nested in their
definition, plaintext in a portable file and ciphertext in a recovery
file, and a link to an episode the file lacks dropped and named
(symptomEpisodeReference).
- OpenAPI regenerated.
The summary and suggest routes accept `Prefer: respond-async`: after the
same quick refusals they answer 202 with a run id, and the background
document AI worker runs the read under two new run kinds
(DOCUMENT_SUMMARY, DOCUMENT_SUGGEST, migration 0370). Without the header
both routes answer synchronously as before; both paths run one shared
body, so they cannot drift.
The worker asks the capability for the record and re-checks the wire for
the provider it picks before every read. A summary that is to be stored
marks the document PENDING while queued, READY when it lands, and
UNAVAILABLE when the run fails or the write does not land. A second
request attaches to a live run only when it would produce the same thing.
The vault asks for both in the background and shows the same calm
waiting line the index uses, worded so a transient read never promises
that leaving the page keeps it. The egress guard and the route inventory
now hold every run kind to its dispatcher re-check and its capability.
The rollup tier and sleep resolve every (type, day) to the source the person's
ladder picks before they aggregate. The dense and raw reads of
/api/measurements/series filtered on user and type only, so with a second
provider a day's value blended the two, a reading present in both showed
twice, and the configured ladder had no effect on those charts.
Both reads now take the ladder-winning source per day through the shared
canonicalMeasurementsCte helper, as the other live readers do:
- the day and hour bucket read of the dense kinds (pulse, glucose, HRV, SpO2),
and the stats strip over its rows;
- the generic raw read (weight, body fat, steps, resting heart rate, ...).
The collapse is per day for the hour grain too, as everywhere else. The helper
gains an optional single-type scope so a series scans one metric, not every row
the person has in the window.
Only a type that has a ladder is collapsed. For a type without one (glucose,
body water, bone mass) the helper breaks the tie by source name, which would
silently hide one of two real sources, so those keep every source as before.
A single-source account reads exactly what is stored.
Tests: a real-database test covering the ladder in both directions, the
per-day fallback, a reading mirrored into two sources, the day-bucket, hour-
bucket and raw reads, a type with no ladder and a single-source account. The
route's unit test file reads its fixtures through a small adapter for the new
raw statements, and the dense-read guard drops the exception for the removed
findMany. The OpenAPI description states the rule.
Refs #1108
Marc-André Bombeck